Component Hardware KL84-8108-AA1 User Manual

SPECIFIER ITEM NO. ________________

®

THE POWER OF SILVER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

1/2" NPSM COUPLING

(127mm TO 610mm)

5" TO 24"

4-3/16”

(106mm)

MAXIMUM THICKNESS

1-1/4”

(32mm)

5/8”

(16mm)

3/16”

(5mm)

7/8" DIA.- 1-1/2" DIA.

(22mm)-(38mm)

1-1/4" DIA.- 1-1/2" DIA.

(32mm)-(38mm)

AS REQUIRED

AS REQUIRED

6-1/2”

(165mm)

5”

(127mm)

8”

(203mm)

2-11/16”

(69mm)

AS REQUIRED

CHG PART NO. _______________________

®

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

Low Lead Deck Mount Widespread Faucet with 8” Swivel Cast

®

Spout and SANIGUARD

Lever Handles

KL84 - 8108 - A__1

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass widespread faucet with total lead content
less than 0.25% by weighted average. 5” (127mm) to 24” (610mm). An 8”
(203mm) swivel cast spout and quarter turn ceramic disc cartridges with
built-in check valves. Lever handles are color-coded and contact points are
incorporated with SANIGUARD
hardware supplied is for standard lavatory risers. Base gasket with sealant
recess and anti-rotation pin for optional installation included. Deck mounted
widespread faucet accommodates installations up to 1-1/2” (38mm) thick.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade Polished Chrome Plated Brass

Commercial Specication Grade Gaskets and Seals

Rated Commercial Hot 180°F
½” NPSM Male Inlets w/ ¼” NPT Compression Fittings
Operating Temperature Range: 40 - 180°F
Operating Pressure: 15 – 125psi

®

antimicrobial product protection.Mounting

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

Part Numbers:

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

KL84 -8108 - A __ 1

Outlet

A 0.5 GPM PCA Spray, Vandal Resistant
B 1.5 GPM Max Laminar & Vandal Resistant
C 0.5 GPM PCA Spray
D 1.5 GPM Max Laminar

www.componenthardware.com

E 2.2 GPM Max Aerator
F 2.2 GPM Max Aerator, Vandal Resistant
H 2.2 GPM Max Aerator, Vandal & Hose Resistant
S 6.0 GPM Wide Rose Spray
M 1.0 GPM PCA Laminar