Component Hardware KL70-9000 User Manual

®

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

2 5/8

[67]

2 1/16

[53]

3 3/8

[86]

A

C

B

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Low Lead Wall Mount Faucet w/Swivel Gooseneck Spouts
and Lever Handle

KL70 - 9000 Series

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass wall mount faucet body
with total lead content less than 0.25% by weighted average.
Wall mount faucet w/ single hole mounting
1/4 Turn compression valve w/check valve
Double O-ring w/ 2.2 GPM [8.3 L] aerator

Full ow stream bubbler included

Lever handle with SANIGUARD® treatment

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPSM Male Inlet
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi
Handle: SANIGUARD® Treatment

*

KL70-9000 3-1/2” (89mm) 6-5/8” (168mm) 8-7/8” (225mm)

KL70-9001 8-1/2” (216mm) 6-7/8” (175mm) 12-5/8” (321mm)

KL70-9002 6” (152mm) 8-5/8” (219mm) 12-5/16” (313mm)

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

Model No. A B C

www.chgusa.com