Component Hardware KL64-9000 User Manual

SPECIFIER ITEM NO. ________________

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

1/2” NPSM

9-3/8”

(238mm)

11-5/8”

(295mm)

2-3/8”

(60mm)

3-1/2”

(89mm)

CHG PART NO. _______________________

Low Lead Deck Mount Faucet w/Gooseneck Spout
and Lever Handle

KL64 - 9000

ENGINEERING SPECIFICATION:

Deck mount polished chrome plated cast brass with total lead content
less than 0.25% by weighted average. 1/4 turn commercial valves w/

check valves. Double O-ring 3-1/2” gooseneck spout. Full ow stream

bubbler included. SANIGUARD® treated lever handle.

*

®

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPSM Male Inlet, 1/4 NPT Compression Fitting
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi
Handle: SANIGUARD® treated

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com