Component Hardware KL56-1000 User Manual

®

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

38 1/2

9 5/8

(244mm)

(978mm)

(102mm)

8 3/8

(213mm)

14 3/8

(365mm)

4

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

*

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Encore® Low Lead Deck Mount Pre-Rinse Assembly

KL56 - 1000

ENGINEERING SPECIFICATION:

Polished chrome plated brass with total lead content less than

0.25% by weighted average
Deck mount faucet with 4” adjustable centers
One Piece Supply Inlet Couplings
Mounting Hardware Included
1/4 Turn Compression Valves w/ Check Valves
Lever Handles SANIGUARD® treated
S/S Flex Hose w/ Santoprene Reinforced Hose
Stainless Steel Strain Relief – Patented
O-Ring Seals - Patented
Standard Full Spray Pattern SANIGUARD® treated

1.2 GPM Spray Face Included
Hold open ring and hose hook included

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

1/2” NPS Male Inlets
Gaskets and Seals Rated Commercial Hot 180°F
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi
Handle and Grip: SANIGUARD® treated

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com