Component Hardware KL50-1000 User Manual

®
®
Certified To NSF/ANSI 61
Section 9-G
LOW LEAD PLUMBING
1/2"NPSM
1/4"NPTM
4 “
(102mm)
38-5/8”
9-3/4”
14-3/8”
(365mm)
(248mm)
(981mm)
COMPLIES WITH:
ASME A112.18.1-2005
CSA B125.1-05 NSF/ANSI 61/9, ANNEX G SECTION 116875 OF THE
CALIFORNIA HEALTH & SAFETY CODE
(COMMONLY KNOW AS AB1953)
VERMONT ACT 193
UNIFORM PLUMBING CODE
ADA
*
SPECIFIER ITEM NO. ________________
CHG PART NO. _______________________
Encore® Low Lead Deck Mount Pre-rinse Assembly
KL50 - 1000
ENGINEERING SPECIFICATION:
Polished chrome plated cast brass with total lead content less than 0.25% by weighted average. Single Hole Deck Mount Pantry Faucet 1/4 Turn Compression Valves w/ Check Valves Lever Handles w/ SANIGUARD® Treatment S/S Flex Hose w/ Santoprene Reinforced Hose Stainless Steel Strain Relief – Patented O-Ring Seals - Patented Standard Full Spray Pattern
1.2 GPM Spray Face Included Hold open ring and hose hook included
TECHNICAL/PERFORMANCE SPECIFICATIONS:
Commercial Specication Grade
Gaskets and Seals Rated Commercial Hot 180°F 1/2” NPS Male Inlets w/ 1/4” NPT Compression Fittings Operating Temperature: 40 - 180°F Operating Pressure: 15 - 125psi Handle and Grip: SANIGUARD® treatment
* KL Series low lead faucets are NSF annex G approved.
Dimensions shown in inches (mm) are for reference only and are subject to change.
1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
www.chgusa.com