Component Hardware KL45-4006-SA1 User Manual

®

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

1 3/4

[44]

1/2" NPSM

B

C

A

(102mm)

4"

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

*

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Encore® Low Lead Wall Mount Faucet w/Swing Spout

KL45-4__ __ __-S__ __

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass with total lead content less
than 0.25% by weighted average.
1/2 NPS on 4” centers supply inlets
1/4 Turn commercial valves w/check valves
Double O-ring swing spouts.

Full ow stream bubbler included

Handles with SANIGUARD® treatment

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPSM Male Inlets
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi
Handle: SANIGUARD® treated

A B C
KL45-4006 6” (152mm) 4-3/4” (121mm) 2-1/2” (64mm)
KL45-4008 8” (203mm) 5-1/4” (133mm) 3” (75mm)
KL45-4010 10” (254mm) 5-11/16” (144mm) 3-7/16” (87mm)
KL45-4012 12” (305mm) 6-1/8” (156mm) 3-7/8” (99mm)

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

Part Numbers:

Valves

1/4 Turn Compression Cartridge w/Check 0
1/4 Turn Ceramic Cartridge w/Check 1

Spout

6” Swing Spout 06
8” Swing Spout 08
10” Swing Spout 10
12” Swing Spout 12

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

KL45-4__ __ __-S__ __

www.chgusa.com

Handles

1 Lever (Shown)
2 Cross
4 4” Wrist Blade

Outlet

A 0.5 GPM PCA Spray, Vandal Resistant
B 1.5 GPM Max Laminar Vandal Resistant
C 0.5 GPM PCA Spray
D 1.5 GPM Max Laminar
F 2.2 GPM Max Aerator, Vandal Resistant
H 2.2 GPM Max Aerator, Vandal & Hose Resistant
S 6.0 GPM Wide Rose Spray