Component Hardware KL26-5015-SP User Manual

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

*

3/8" NPSM

16-1/8” (411mm)

14-7/8” (378mm) AERATOR EXTENDED (MAX)

15” (381mm) AERATOR RETRACTED (MIN)

4-1/8” (106mm)

1-7/8” (49mm)

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Low Lead Deck Mounted Glass Filler

KL26-5015-SP

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass with total lead content
less than 0.25% by weighted average. Stainless steel riser,
valve components and two-position lever arm. Lever arm is
spring operated for automatic closure or may be set for the

constant ON position. The spout is ow rate adjustable and

has an internal feature for splash-free operation. Mounting

®

hardware included

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade
3/8” NPSM Male Inlet
Operating Temperature: 40 - 180°F
Operating Pressure: 20 - 125psi

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com