Component Hardware KL26-5001 User Manual

®

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

4 3/4

3

(121mm)

(76mm)

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Low Lead Wall Mounted Glass Filler

KL26-5001

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass with total lead content
less than 0.25% by weighted average.
Two Position Lever Arm
Stainless Steel Valve and Lever
1/2” NPSM Male Inlet
Includes Mounting Hardware

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade
1/2” NPSM Male Inlet
Operating Temperature: 40 - 180°F
Operating Pressure: 20 - 125psi

*

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com