Component Hardware KL22-3100-SP User Manual

®

®

THE POWER OF SIL V ER

Certified To NSF/ANSI 61

Section 9-G

LOW
LEAD PLUMBING

1-7/8” (49mm)

2-1/4” (56mm)

2-3/4” (69mm)

1/4" NPT

1-1/8”

(30mm)

MOUNTING
HARDWARE

1/4" UNION TAILPIECE

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

*

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Low Lead Dipper Well Faucet w/ Flow Restrictor

KL22-3100-SP

ENGINEERING SPECIFICATION:

Dipper well body and valve components are polished, chrome
plated brass with total lead content less than 0.25% by weighted

average. Faucet assembly comes furnished with a solid
unbreakable chrome plated handle, mounting hardware and

¼” union tailpiece. The faucet assembly has a built-in ow
restrictor with a ow rate of 0.4 GPM at 45 PSI. Recommend a

1-1/8” hole for deck mounting of faucet to accommodate ½”
supply nipples.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade
1/2” NPSM Male Inlet
Operating Temperature: 40 - 180°F
Operating Pressure: 20 - 125psi

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com