Component Hardware KD12 - 9810 - TE1 User Manual

SPECIFIER ITEM NO. ________________

®

(SUPPLY INLETS 1/2-14 NPSM)

COMPRESSION NUT

CONE WASHER

8"

(203mm)

1-1/2"

(38mm)

4-3/4"

(120mm)

8"

(203mm)

CHG PART NO. _______________________

Deck Mount Single Handle Faucet with Stainless Steel
Ball Valve, Lever Handle & Deck Plate

KD12 - 9810 - TE1

ENGINEERING SPECIFICATION:

Deck mount polished chrome-plated brass faucet with 8” [203mm]
centers. The faucet has a 8” [203mm] swivel cast spout and oper­ates using a single lever handle with stainless steel ball valve. Unit
is furnished with a 2.0 GPM [7.56 L/M) at 60 PSI aerator. Mounting
hardware supplied is for standard lavatory risers. Base gasket with
sealant recess is included. Deck mounted widespread faucet ac­commodates installations up to 1-1/2” [38mm] thick.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade Polished Chrome Plated Brass

Commercial Specication Grade Gaskets and Seals

Rated Commercial Hot 180°F
½” NPSM Male Inlets w/ 1/2” tube compression seals & nuts
Operating Temperature Range: 40 - 180°F
Operating Pressure: 15 – 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com