Component Hardware KD12 - 2810 - TE1 User Manual

SPECIFIER ITEM NO. ________________

®

(SUPPLY INLETS 1/2-14 NPSM)

COMPRESSION NUT

CONE WASHER

8"

(203mm)

1-1/2"

(38mm)

4-3/4"

(120mm)

8"

(203mm)

2-1/16"
(52mm)

4-9/16"

(117mm)

CHG PART NO. _______________________

Deck Mount Single Handle Faucet with Stainless Steel
Ball Valve, Lever Handle, Deck Plate with Side Sprayer

KD12 - 2810 - TE1

ENGINEERING SPECIFICATION:

Deck mount polished chrome-plated brass faucet with 8” [203mm]
centers. The faucet has a 8” [203mm] swivel cast spout and oper­ates using a single lever handle with stainless steel ball valve. Unit
is furnished with a 2.0 GPM [7.56 L/M) at 60 PSI aerator. Mounting
hardware supplied is for standard lavatory risers. Deck mounted
spray head with 48” vinyl nylon netted hose included. Base gasket
with sealant recess is included. Deck mounted widespread faucet
accommodates installations up to 1-1/2” [38mm] thick.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade Polished Chrome Plated Brass

Commercial Specication Grade Gaskets and Seals

Rated Commercial Hot 180°F
½” NPSM Male Inlets w/ 1/2” tube compression seals & nuts
Operating Temperature Range: 40 - 180°F
Operating Pressure: 15 – 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com