WLM200N5-26dBm MiniPCI network adapter provides leading 802.11a/n
performance
of actual user throughput on both the uplink and downlink. Adding
Wireless N to your Wireless device, it provides higher efficiency for
everyday activities such as file transfers, Internet browsing, and media
streaming.
high output power of 400 mW, allowing an extended range of wireless
coverage. Combined with excellent receiver sensitivity, WLM200N526dBm is the miniPCI choice for long distance links, or those where signal
levels are reduced due to minor obstructions such as trees or building.
Built on Atheros chipset, it can be used with all draft IEEE 802.11n
compatible WLANs, and is ideally suited to be integrated into a wide
range of OEM devices.
, supporting up to 300Mbps physical data rates and 200Mbps
Driver Linux Madwifi, WindowsXP , Windows 2000,Windwos Vista
ORDERING CONFIGURATIONS
CODES SPEED Carton Dimension
WLM200NX 6AA1100
WLM200NX 6AA1300
Up to 300 Mbps
physical data rates
Up to 300 Mbps
physical data rates
①
Configurations are subjected to change without notice
COMPLIANCE INFORMATION
FCC Compliance State me nt: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device mus t accept any interference received, inc luding interference
that may cause undesired op erati on. This device must accept any
interference received, including interference that may cause undesired
operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed
and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be collocated or operating in
conjunction with any other antenna or transm it te r. End-users and installers
must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications no t expressly approved by the grantee of
this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
(
5) Outdoor Operations in the 5.15~5.25GHz band is prohibited.
(1) This device is approved for OEM installation with specified ante nnas as
listed in this Manual. It is the responsibility of the Installer to comply with the
separation distance for satisfying RF exposure compliance.
(2) This device only could work when being installed into “client devices”
which could not transmit automatically, such as Notebook P.C. , with the
software driver limit.
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid and the
FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product
(including the tr ansmitter) and obtaining a separate FCC authorization.
WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode
Function
IMPORTANT NOTE: EQUIPMENT MANUFACTURERS
COMPEX FOR DISPLAYING WLM200N5-26 MODULAR
FCC ID ON FINAL INTEGRATED