Compex Systems WLE350N5 25H User Manual

List of Antennas

The following antennas are certified with this MiniPCIe Radio module:

Antenna type 1: Panel Antenna
Antenna Gain: 19 dBi
Manufacturer : Compex
Model name: MME-5N19

Antenna type 2: Panel Antenna
Antenna Gain: 17 dBi
Connector Type: N-Female
Manufacturer : Compex
Model name: MJE-5N17

Antenna type 3: Omni Antenna
Antenna Gain: 10 dBi
Manufacturer : Foshan Lanbowan Communications Ltd.
Model name: ANT5158Q10V

Antenna type 4: Omni Antenna
Antenna Gain: 7 dBi
Manufacturer : SmartANT Telecom Co.,Ltd
Model name: SAA04-22008A

Antenna type 5: Invented Antenna (with Omni Directional behavior)
Antenna Gain: 5 dBi
onnector Type: MHF-Female
Manufacturer : A*STAR
Model name: IP-TDF V2.0

Antenna type 6: Omni Antenna (swivel)
Antenna Gain: 2 dBi
Connector Type: SMA-reverse Female
Manufacturer: Kunshan Wavelink Electronic Co., Ltd
Model name: WD12020258G

Both separate RF adapter cables supplied with this product provide 1dBi loss.
The Inverted antenna does not need to use any RF adapter cable, it directly connects to the RF module.

How to integrate this device (Driver and Hardware information):

MiniPCIe Radio module shall be installed by a professional with antennas listed above, hence it is for
professional installation only. The host device must be equipped with a MiniPCIe slot for inserting this
MiniPCIe Radio module. The device can be accessed by the host device by programming the MiniPCIe
Radio module address over the MiniPCIe interface by means. Depending on the CPU platform, an
Atheros AR9582/AR9592 driver for this may may be available from www.compex.com.sg or on
request by contacting Compex. It is not possible to program/change the power or channels as
certified in this filing. The antennas shall be installed in such a was, that a minimum distance of 20cm
is maintained between the antennas of the device and the user, as such this module is only suitable
for integration in end-user devices classified by the FCC as ¨Mobile Device¨.