Compex ReadyLINK PS2208B Quick Install Manual

Page 1
Quick Install Guide”
Compex 8 Port Dual Speed Fast Ethernet Switch
PS2208B
Version 1.1C
Page 2
±±
®®
¬¬
Figure 1: PS2208B Top View
Figure 2: Back Panel View of PS2208B
7.5V/1.5AUplinkNormal
°°
Figure 3: Side Panel View of PS2208B
--
¯¯
Page 3
Figure 4: PS2208B in a network
(A: Workstation to Hub)
Figure 5: PS2208B in a network
(B: Hub cascading using Uplink port)
Page 4
Contents
≥≥
≥≥
≥≥
≥≥
≥≥
≥≥ ≥≥
Diagrams English Text
Ø Introduction Page 1 Ø Package Contents Ø Hub Features Page 2 Ø Features Page 2 Ø Specifications Ø Installation of PS2208B Page 3 Ø Troubleshooting
German Text Russian Text French Text Notes
Technical Support
Front Flap
Page 1
Page 1
Page 2
Page 4
Page 6
Page 11
Page 16
2nd Last Page Last Page
Page 5
“Quick Install Guide”
Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208B)
Introduction
Ø
The key features of the Compex 8 Port Dual Speed Fast Ethernet Switch (PS2208B) are as follows:
Provides high-speed switching between 10Base-T Ethernet segments as well as
100Base-TX Fast Ethernet segments.
Supports 10Base-T to 100Base-TX connectivity, allowing for progressive migration
from 10Base-T to 100Base-TX technology.
Provides high throughput because Switches route data packets to destination port
instead of broadcasting them to all ports. Alleviates congestion for applications with high-bandwidth requirements such as multimedia applications and large file transfers.
All ports support full auto-negotiation for 10Mbps and 100Mbps speed and half or full
duplex mode connection. Thus, switching between 100Base-TX and 10Base-T networks does not require any manual configuration.
Implemented store-and-forward switching scheme prevents the propagation of
erroneous packets.
Provides a dynamic memory sharing in/out buffer to ensure fast error free packet
storage and transmission, which greatly improves your network performance.
Package Contents
Ø
1 PS2208B Switch Unit 1 Power Adapter 1 Quick Install Guide 1 Warranty Card
English Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208B)
1
Page 6
Hub Features (see diagrams on inner cover)
Ø
••
Power LED ON indicates switch is receiving power.
‚‚
Port LED STEADY AMBER: 10M Link
BLINK AMBER: 10M ActivitySTEADY GREEN: 100M LinkBLINK GREEN: 100M Activity
ƒƒ
8 RJ-45 Ports: 8 UTP ports, or 7 ports + 1 Uplink port.
„„
Uplink Switch When set to Uplink mode, it will configure port#1 as
Uplink port.
Slide to “Normal” side to set port 1 to Normal mode.
……
FLW/Ctrl LED Memory Overflow LED (Green): ON indicates memory full
in switching buffer or error occurred in memory.
††
DC Power Jack Jack for connection to an external power adapter (7.5V).
Features
Ø
Separate collision domain on each port allows unrestricted topology implementation
for fast Ethernet networks.
Each port implements an intelligent unicast address filtering mechanism and a simple
learning and aging algorithm, this dramatically reduces inter-segment traffic.
Comes in a compact desktop unit.
Specifications
Ø
Industrial Standards Complies with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX and ANSI/IEEE 802.3 N-Way auto­negotiation standards; FCC Class A; CE mark.
Interface: Each unit has eight 10/100Mbps UTP ports (RJ-45). Port Speed/Mode
Selection:
Link Distance: 100Base-TX: can support up to 100M of ‘Category
LED Indicators LED indicators are provided for status monitoring.
Dynamic memory
sharing In/Out buffer:
Auto-negotiation
5’ UTP cable to PC, Hub or another Switch. 10Base-T: can support up to 100M of ‘Category 3, 4, and 5’ UTP cable to PC, Hub or another Switch.
These include LEDs for system power, port speed, traffic activity and link. 2M Bits
2 Compex 8 Port Dual Speed Fast Ethernet
English
Switch (PS2208B)
Page 7
Forwarding Method: Store-and-Forward. Number of MAC
Addresses:
Dynamic Addresses
Learning/Filtering:
Power Supply: External 7.5VDC, 1.5A Environment
Requirements:
Physical Dimensions: 151 x 92x 25mm (L x W x H) Weight: About 0.20 kg
Safety: UL, CSA, TUV/GS.
Installation of PS2208B
Ø
PS2208B can be installed on a flat surface (desktop) or mounted on a wall. Follow the steps below for proper installation.
8K MAC Addresses.
Yes.
Temperature: Operating: 0°C to 40°C Storage: -5°C to 60°C Humidity: Operating: 10% to 90% (non-condensing)
Desktop installation:
1. Unpack the switch.
2. Choose a location near the devices to be connected and close to an electrical outlet.
3. Set the switch on a desktop or any other clean, smooth, level and sturdy surface.
Make sure there is enough clearance around the unit to allow attachment of network cables, power adapter and allow air circulation.
4. Connect the power adapter to the switch. The POWER LED and PORT LED for
each connected port should light up.
5. The switch is ready to operate.
Wall installation:
1. Measure the distance between the mounting holes at the bottom of the switch and
mark the wall to match the location of the mounting holes on the switch.
2. Drill pilot holes at the two marked locations.
3. Fix two 5/16-inch diameters flat-head mounting screws into the wall, with the heads
of the screws protruded 1/8 inch out from the wall.
4. Carefully set the switch over the screws in the wall; then slide the hub down onto the
screws, pressing it slight to the wall.
5. Connect the power adapter to the switch. The POWER LED and PORT LED for
each connected port should light up.
6. The switch is ready to operate.
English Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208B)
3
Page 8
Troubleshooting
Ø
LED Indicators: The Compex Pocket Switch PS2208B are designed with LED indicators to indicate the operating status such as: Power ON/OFF, Activity/Link Status and 10/100Mbps connection status. The LEDs function as useful troubleshooting aids and are found on the front panel of the PS2208B.
LED indicator Description of Function
Power Green LED.
If Power LED does not come ON, check that:
•• Power adapter unit and cord are properly inserted into the
socket and hub.
Port Amber LED for 10M connection;
Green LED for 100M connection:
When LED does not turn ON, check that:
•• Wire pair connections at RJ-45 plug are correct.
•• RJ-45 plug is fully inserted until you hear a click sound.
•• The PC is powered-up.
4 Compex 8 Port Dual Speed Fast Ethernet
English
Switch (PS2208B)
Page 9
Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or implied,
including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product
described in this guide, without prior notice. Compex, Inc will not be liable for any technical inaccuracies or
typographical errors found in this guide. Changes are periodically made to the information contained herein and
Trademark Information: Compex®, ReadyLINK® and MicroHub® are registered trademarks of Compex,
Notice: Copyright © 2001 by Compex, Inc. All rights reserved. Reproduction, adaptation, or translation
pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses and can radiate radio frequency
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception, the user is encouraged to try to
Connect the computer into an outlet on a
Increase the separation between the
Consult the dealer or an experienced
Caution: Any changes or modifications not expressly approved by the grantee of this device could void the
This device must accept any interference received, including interference that may cause undesired
will be incorporated into later versions of the guide. The information contained is subject to change without prior notice.
Inc. All brand and product names are trademarks or registered trademarks of their respective owners.
without prior permission of Compex, Inc. is prohibited, except as allowed under the copyright laws.
Manual Revision by Xu Xiaojing.
Manual Number: M-0311-V1.1C Version 1.1C, March 2001
FCC NOTICE : This device has been tested and found to comply with the limits for a Class A digital device,
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
correct the interference by one or more of the following measures:
±±
Reorient or relocate the receiving antenna.
±±
circuit different from that to which the receiver is connected.
user's authority to operate the equipment.
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and
(2)
operation.
±±
computer and receiver.
±±
radio/TV technician for help.
DECLARATION OF CONFORMITY: Compex, Inc. declares that the product: Product Name: Compex 8 Port Dual Speed Fast Ethernet Switch PS2208B Model No.: PS2208B conforms to the following Product Standards: Radiated Emission Standards: EN55022A, FCC Part 15 Class A; Conducted Emission Standards: EN60555Pt2 conducted emission; EN55022A conducted emission, FCC Part 15 Class A; Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4; Low Voltage Directive: EN60950.
Therefore, this product is in conformity with the following regional standards:
FCC Class A  following the provisions of FCC Part 15 directive; CE Mark  following the provisions of the EC directive.
Manufacturer’s Name: Compex, Inc.
19th March, 2001
Address: 4051 E. La Palma, Unit A,
Anaheim, CA 92807, USA
European Contact:
ReadyLINK Networktechnology GmbH,
Technical Support
Albert Einstein Straβe 34 / M21, 63322 Rödermark, Germany [Fax: +49 (60) 749-0668]
_________________
Shi Jia Xiang
Deputy R & D Manager
English Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208B)
5
Page 10
Quick Install Guide
Compex, Inc.
4051 E. La Palma, Unit A Anaheim, CA 92807 USA (714) 630-7302
2001 by Compex, Inc.
All Rights Reserved.
Compex 8 Port Dual Speed Fast Ethernet Switch
PS2208B
Manual Number:
M-0311-V1.1C M-0311-V1.1G M-0311-V1.1R M-0311-V1.1F
Version 1.1C /G /R/F March 2001
N908
Loading...