Compex PoE Plus, PoE+ 1A/6A4815, PoE+ 1A/6A4825, PoE+ 1P/6P4830, PoE+ 1P/6P0000 Technical Specifications

,

product datasheet

Compex PoE PLUS

The Compex PoE+ (1A/6A4815) is an IEEE 802.3af compatible high po er active
injector designed for wireless Access Points. Supporting an output power f 15 W.

The Compex PoE+ (1A/6A4825) high power active injector supports a higher output
power of 25 W. It supports the same IEEE 802.3af handshake protocol as Compex
PoE+ (1A/6A4815) but has a higher current power source an d a higher cur ent cutoff
setting.

 Supports both 10

or 100Mb
network

ps

connectivity to a
Wireless Access
Point

 Allows Wireless

Access Point to be
deployed without a
nearby power
source

The Compex PoE+ (1P/6P4830) is a high power passive injector that supports an
output power of 30W. This injec compatible
receiving equipment can be damaged by this injector.

The Compex PoE+ (1P/6P0000) is the injector of 1P/6P4830. The only di ferenc e is
that it does not include the 48V power supply. The output power will then epend on
the power rating of the power supply that you choose to use (Up to 30W).

Advanced Auto-Sensing Algorithm (Only for 1A/6A4815 and 1A/6A4825)

Advanced Auto-Sensing Algorithm will provide power only to IEEE 802.3af compatible
equipment.

Cost Effective

Compex PoE Plus are cost–effective solution for deploying Wireless Access Point in indoor
or outdoor environments where power source is not readil y available or power cables are
not permitted.

TECHNICAL SPECIFICATIONS

Compex Systems Pte Ltd
135 Joo Seng Road,
#08-01
PM Industrial Building
Singapore 368363

tel: [phone]
fax: [phone]
www.compex.com.sg

Compex Inc, USA.
840 Columbia Street,
Suite B Brea. CA 92821

tel: [phone]
fax: [phone]

Copyright © 2007 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. While every effort is
made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to change
without notice. Datasheet Version: 1.3

PoE+ 1A4815 6A4815, PoE+ 1A4825 6A4825,
PoE+ 1P4830 6P4830

PoE+ 1P0000 6P0000,

w

o

r

tor is not IEEE802.3af compatible, In

f

d

Model

Active or Passive Acitve Active Passive Passive
Output Power 48V / 15W 48V / 25W 48V / 30W 48V / (Up to 30W)

802.3af COMPLIANCE Yes Yes* No No
Power Supply Included Yes Yes Yes No

STANDARD COMPLIANCE

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX

INTERFACE

Injector: 2 X RJ45 port,

1 X Power Supply Connector

NETWORK MEDIA

10BASE-T Ethernet: UTP Cat. 3,4,5, Unshielded Twisted Pair (UTP) Cable
100BASE-TX Fast Ethernet: UTP Cat. 5, Unshielded Twisted Pair (UTP) Cable

DATA TRANSFER RATE

10 / 100 Mbps

LED INDICATORS

Injector: Remote Power, Local Power

TEMPERATURE

Operating: 0 ~ 40 oC Storage: -10 – 70 oC

DIMENSION (Without supplied Power Adapter)

220x25x22mm

CONFIGURATION CODES

PoE+ 1A (leaded)
PoE+ 6A (RoHS)

*802.3af handshake protocol compatible but exceeds standard cut-off current ratings.

PoE+
(1A/6A4815)

PoE+
(1A/6A4825)

PoE+ 1P (leaded)
PoE+ 6P (RoHS)

PoE+
(1P/6P4830)

PoE+
(1P/6P0000)