Compaq SW5425 User Manual

MODEL S
Compaq SW5425 De sktop Gigabit Ethernet Switch
24 10/100Base-TX ports + one 1000Base-SX GBIC port
338376-B21
Compaq delivers Gigabit speed for desktop switching and high-performanc e workgroup appli cations with the Compaq SW5425
QUICKSPECS
.
.
.
High Availability/High-Performance Switch
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Several forces are driving the need for high speed LANs today - The growth of the Internet, re-centralization of corporate computing, and network-centric applications. Applications today such as transaction processing, voice, video, graphics, and Internet access are bandwidth consuming, server-oriented, and require higher speed networks. They demand high performance and ready availability for the desktop user.
The Compaq SW5425 Desktop Gigabit Ethernet Switch is poised to meet these demanding needs at the desktop with Gigabit switching capability. Users can employ the 24 10Base-T/100Base-TX ports that autosense for 10/100 Mbps operation and half- or full-duplex operation. The single Gigabit Ethernet port can accommodate high performance applications with fail-over achieved through the redundant port. The SW5425 switch is capable of non-blocking, line rate performance on all ports when configured as a Layer 2 switch or as a Layer 3 IP router.
EASE OF USE
Auto-negotiation
Each RJ-45 switched port on the Compaq SW5425 automatically senses if it is a 10 Mbps or a 100 Mbps network connection, thus allowing for seamless communication among the Ethernet family of protocols.
Hot-swappable Gigabit Interface Connector
The standard Gigabit Ethernet port, a hot-swappable 850nm 1000Base-SX GBIC module, can be replaced with a 1000Base-LX GBIC for networks spanning longer distances.
PER FORMANCE
More Power
A massive backplane provides more than enough raw bandwidth to support non-blocking operation. This means that all ports transmit and receive traffic at line rate (full-duplex operation) without over-subscribing the switch.
Dynamically assigned buffer memory (2 MB) ensures that even during peak traffic conditions no data is lost.
Load Sharing/Port Aggregation
The Compaq SW5425 can be configured to use a group of ports to carry traffic in parallel between switches. This creates higher throughput and resilience.
Quality of Service (QoS)
QoS dedicates bandwidth to traffic types, allowing network managers to shape network traffic and provide needed bandwidth to business-critical applications.
NET WORK MANAGEMENT
Compaq Networking Management Software (CNMS)
CNMS provides an intuitive graphical user interface making installation and monitoring of the Compaq SW5425 effortless.
Easy to use TELNET and Web-based management are provided for hands-on management and configuration. The Compaq SW5425 can be graphically managed under powerful management platforms such as HP OpenView, IBM NetView, SunNet Manager, and Novell ManageWise using WinManager, a product from Compaq partner Ordinox Networks.
Remote Monitoring (RMON) Groups 1 , 2, 3, 9
The SW5425 supports four of the nine groups of remote monitoring — network traffic statistics, history, alarms, and events.
Virtual LANs (VLANs)
Setting up VLANs eases many time-consuming ta sks of network administration while increasing efficiency in network operations. By tagging each frame with information about which virtual LAN it belongs to, users can be connected to any LAN segment regardless of their physical location. The SW5425 uses the IEEE 802.1Q draft standard and supports up to 256 VLANs. The switch also supports protocol and port based VLANs that are not covered in the standard
Compaq SW5425
Desktop Gigabit
Ethernet Switch
11-101 DA-10090-01-001 — 9.13.1999
QUICKSPECS
.
.
.
NET WORK MANAGEMENT (continued)
.
.
.
.
.
.
Port Mirroring
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
With this capability, the network manager can configure the switch to copy all traffic associated with one or more ports to a monitor port on the switch. The monitor port can be connected to a protocol analyzer or RMON probe for network traffic analysis and connection integrity.
SECUR ITY/RELIABILITY
Spanning Tree Protocol
The IEEE 802.1D spanning tree protocol provides fault tolerance by allowing the user to implement parallel paths for network traffic. Redundant paths are disabled when the main paths are operational and enabled if the main path fails.
Redundancy (Fault Tolerance)
One redundant Gigabit Ethernet port is included for fast failover for the active Gigabit port. If the active port fails or loses link status, the switch automatically activates the redundant port. An optional redundant power supply can also be purchased.
Routing Standards Compliance
SW5425 supports Open Shortest Path First (OSPF), Routing Information Protocol (RIP), and RIP v2, ensuring interoperability between other Compaq switches and legacy routers.
This allows network managers to build fault-tolerant meshed topologies that eliminate single points of failure and avoid network downtime.
Worldwide Leader in Total Cost of Ownership
Integrated management, guaranteed Ethernet and Fast Ethernet inter-operability, single source of support, and strong service and support options provide Compaq customers with a lower total cost of ownership (TCO), a higher level of network reliability, and greater confidence.
Designed with quality and long life in mind, the Compaq SW5425 meets all of Compaq’s high design and manufacturing standards. Surface-mount technology, ASIC-based hardware, state-of-the-art manufacturing facilities, and top-notch quality inspection provide the reliability and quality expected from a Compaq product.
SP ECIFICATIONS
10/100Base-TX ports 24 1000Base-SX ports 1
Redundant PHY port 1 GBIC modules Yes Auto-negotiate full-/half-duple x Yes Auto-negotiate 10/100Base-TX Yes Layer 2 MAC address support 32k Layer 3 IP FDB 32k QoS flows 32k Internal switch fabric bandwidth 8.5 Gbps Buffer memory 2 MB dynamic Average gigabi t latency < 3 L2 Aggregate Forwarding rate (64 byte frames) 5.1 Mpps L3 Aggregate Forwarding rate (64 byte frames) 5.1 Mpps Port trunking 2 or 4 port groups Load sharing Yes
802.1Q VLAN Tagging Yes
802.1p Priority queuing Yes
Compaq SW5425
Desktop Gigabit
Ethernet Switch
µS
11-102 DA-10090-01-001 — 9.13.1999
Loading...
+ 4 hidden pages