Compaq MP1600 User Manual

Compaq MP1600



Microportable Projector

User's Guide

Notice

The information in this guide is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE

LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation.

Compaq and Deskpro are registered in the U. S. Patent and Trademark Office.

Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft products referenced herein are trademarks or registered trademarks of Microsoft Corporation.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.

The software described in this guide is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement.

User’s Guide

Compaq MP1600 Microportable Projector

Second Edition (November 1999) Part Number 383706-002

Compaq Computer Corporation

ONTENTS

preface

SING THIS GUIDE

Symbols and Conventions..................................................................v

Warning Messages ............................................................................vi

book 1

NGLISH

Product Features..............................................................................1-1

Introduction.....................................................................................1-2

Setting Up the Projector..................................................................1-3

Connecting the Projector to a Portable Computer.....................1-4

Connecting the Projector to a Desktop Computer.....................1-5

Connecting the Projector to a Compaq PC Companion ............1-6

Connecting the Projector to Other Video Sources......................1-7

Attaching the Compaq Video Adapter to the

MP1600 Microportable Projector ............................................1-7

Connecting a Camcorder, VCR, or DVD Player

to the Compaq Video Adapter..................................................1-8

Powering On the Projector..........................................................1-9

Adjusting the Projected Image..................................................1-11

Adjusting the Projector Height ..............................................1-11

Adjusting the Projector Focus................................................1-13

Image Size Adjustment.............................................................1-14

Using the Compaq MP1600 Presentation Utility .....................1-15

Using the Compaq Projector Display Assistant........................1-16

Powering Off the Projector.......................................................1-17

Operating the Projector .................................................................1-18

On-Screen Menu Adjustments..................................................1-19

Video On-Screen Menu Adjustments ....................................1-20

Adjusting the On-Screen Menus............................................1-21

Explaining Functions in the On-Screen Menu.......................1-23

Special On-Screen Messages....................................................1-25

Contents iii

Care and Maintenance ..................................................................1-26

Protecting the Projector............................................................1-26

Cleaning the Lens.....................................................................1-27

Replacing the Projector Lamp Module ....................................1-28

appendix A

ROUBLESHOOTING

appendix B

GENCY REGULATORY NOTICES

Federal Communications Commission Notice.............................. B-1

Modifications............................................................................. B-1

Cables ........................................................................................ B-1

Declaration of Conformity for Products Marked

with the FCC Logo—United States Only............................... B-2

Canadian Notice...................................................................... B-2

Avis Canadien......................................................................... B-2

European Notice ..................................................................... B-3

Japanese Notice ...................................................................... B-3

PECIFICATIONS

Specifications................................................................................. B-4

Preset Display Resolutions Table.............................................. B-5

Color Display Values.............................................................. B-6

Power Cords .............................................................................. B-6

appendix C

SING THE COMPAQ VIDEO ADAPTER

Identifying the Buttons and Connectors........................................ C-1

Attaching the Video Adapter to the

MP1600 Microportable Projector.................................................. C-2

Connecting a Video Player............................................................ C-3

iv Contents

preface

Using This Guide

The User's Guide includes general information about your projector, troubleshooting and diagnostics, and technical specifications.

Symbols and Conventions

The following words and symbols mark special messages throughout this guide:

WARNING:

failure to follow directions could result in bodily harm or loss of life.

CAUTION:

failure to follow directions could result in damage to equipment or loss of information.

Text set off in this manner presents clarifying information,

✎

specific instructions, commentary, sidelights, or interesting points of view

Text set off in this manner indicates that

Preface v

Warning Messages

Before operating the projector, please read the following messages.

WARNING:

To reduce the risk of harm to your eyes, do not look



directly into the bright light of the projection lens. To reduce the risk of fire or electric shock, do not



expose this product to rain or moisture. To reduce the risk of electric shock, do not



disassemble the projector other than to replace the lamp module.

To reduce the risk of personal injury, allow the unit to



cool down before changing the lamp, and always unplug the power cord first.

vi Preface

book 1

English

Product Features

The Compaq MP1600 Microportable Projector generates crisp, clear images onto a projection screen by using Digital Light Processing (DLP) Technology. The features include the following:

120-watt high-efficiency, long-life lamp



1024 × 768 native XGA resolution



Maximum resolution: 1280 × 1024 SXGA



Digitally zooms to 32×



Weighs 4.2 pounds (weight may vary slightly)



Standard VGA analog connection



All digital DFP connection



Convenient auto-image adjustment



16.7 million displayable colors



Multilingual on-screen adjustment menu



Plug and Play capability



Compaq MP1600 Presentation utility for ease of use in setting



up the projector with portable computers

Compaq Projector Display Assistant utility to adjust screen



settings

Carrying case, projector carrying handle, and lens cleaning



cloth kit included Security lock slot



User replaceable lamp module



Optional video adapter



MP1600 Microportable Projector 1-1

Introduction

The Compaq MP1600 Microportable Projector comes with the following items:

Projector and lens cap



10-foot power cable



Two signal cables:



One VGA signal cable for use with computers, portables,



and some handheld products One digital DFP (digital flat panel) signal cable for use



with compatible digital sources

Carrying case and separate projector carrying handle



Lens cleaning cloth kit



Phillips screwdriver



Quick Setup card, this



CD-ROM containing the Compaq MP1600 Presentation



User’s Guide

and other documentation

utility program, Compaq Projector Display Assistant utility, and an English

User’s Guide

1-2 MP1600 Microportable Projector

If your shipping box does not contain all of the listed items, please contact your Compaq authorized dealer, reseller, or service provider.

Setting Up the Projector

Instructions below and on the following pages explain how to set up the projector. Separate setup instructions are described for the following products:

Portable and desktop computer



Handheld computers with VGA capability



VCR, DVD, or camcorder (requires optional video adapter)



The projector is hot pluggable and can be connected, while

✎

powered on, to these products while they are powered on.

IMPORTANT:

Place the projector on a stable desk or table at a distance not less than 3.3 feet and not greater than 35 feet from the projection screen.

damage to your equipment:

Do not disable the power cord grounding plug. The



WARNING:

To reduce the risk of electric shock or

grounding plug is an important safety feature. Plug the power cord into a grounded (earthed)



electrical outlet that is easily accessible at all times. Disconnect power from the projector by unplugging



the power cord from the electrical outlet. Do not place anything on power cords or cables.



Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

MP1600 Microportable Projector 1-3

Connecting the Projector to a Portable Computer

1. Connect one end of the projector signal cable to the projector and the other end to the VGA connector connector screws. Use the VGA cable OR the DFP cable; do not connect both cables.

Be sure the signal cable aligns with the connector. Do not

✎

force the cable onto the connector or you may damage the signal cable or the projector.

2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.

on the portable computer and tighten the

or the DFP

For more information on setting up the projector with a

✎

portable computer, see the white paper “Compaq MP1600 Microportable Projector and the Armada Graphics/Video Capabilities” included on the CD-ROM.

1-4 MP1600 Microportable Projector

Connecting the Projector to a Desktop Computer

1. Connect one end of the projector signal cable projector and the other end to the VGA connector on the desktop computer and tighten the screws.

If your computer has a digital connector, connect one end of

✎

the digital flat panel (DFP) signal cable 1A to the digital connector on the projector and the other end to the digital connector on the computer. Connect either the VGA cable OR the DFP cable; do not connect both cables.

Be sure the signal cable aligns with the connector. Do not force

✎

the cable onto the connector or you may damage the signal cable or the projector.

2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.

to the

For security purposes, this projector has been fitted with a slot

✎

(located on the left, front side) for use with a security cable lock that can be purchased separately at most computer stores.

MP1600 Microportable Projector 1-5

Connecting the Projector to a Compaq PC Companion

To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector.

The VGA-out PC Card with the 15-pin connector is not

✎

included with the Compaq PC Companion. It is sold separately. For information on purchasing this card, call your Compaq authorized dealer, seller, or reseller. To locate a reseller near you, call Compaq at 1-800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com.

1. Connect one end of the signal cable 1 to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC Companion before or after connecting the signal cable.

2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.

To connect a Compaq Aero device, follow the instructions for

✎

connecting the projector to a portable computer.

1-6 MP1600 Microportable Projector

Connecting the Projector to Other Video Sources

To connect the projector to a camcorder, DVD player, or VCR, the Compaq Video Adapter must be connected to the projector. The Compaq Video Adapter has been specifically designed to fit the Compaq MP1600 Microportable Projector. This adapter converts the signals from the camcorder for compatibility with the projector.

The Compaq Video Adapter is not included with the Compaq

✎

MP1600 Microportable Projector. It is sold separately. For information on purchasing this video adapter, call your Compaq authorized dealer, seller, or reseller. To locate a reseller near you, call 1-800-AT-COMPAQ or visit the Compaq web site at

http://www.compaq.com.

Attaching the Compaq Video Adapter to the MP1600 Microportable Projector

1. Push in the two buttons 1 on the bottom sides of the video adapter.

2. Insert the hooks on top of the video adapter into the upper

slots 2 on the projector by inserting and pushing upward, then insert the adapter plug into the digital connector 3 on the back of the projector.

Release the buttons on the sides of the video adapter to

3. complete the connection.

MP1600 Microportable Projector 1-7

✎

When the adapter is activated, one of the LEDs 4 on the video adapter will turn green.

Connecting a Camcorder, VCR, or DVD Player to the Compaq Video Adapter

1. Use an RCA cable to connect a VCR to the video connector on the video adapter. Use an S-video cable to connect a camcorder or DVD player to the S-video connector 2 on the video adapter.

2. Connect one end of the power cord 3 into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector.

3. Press the Source button 4 to select between the analog and the composite S-video connectors when both are connected to digital products.

The Compaq Video Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. For more information on using the video adapter, see Appendix C, “Using

the Compaq Video Adapter.”

1-8 MP1600 Microportable Projector

Be sure to place the rubber boot cover over the DFP

✎

(digital) connector on the projector when it is not in use to prevent electrostatic discharges from damaging the connector.

Powering On the Projector

Follow these instructions to power on the projector:

1. Ensure that the power cord and signal cable are securely connected.

✎

Make sure the projector is perpendicular to the screen.

2. Remove the lens cap 1 by pulling it straight out.

3. Turn on the Main power switch 2 on the back of the projector and allow the projector to warm up for 1-2 minutes.

When the projector has warmed up, the Compaq startup screen

✎

will display and the LED on the Standby button 3 will turn green. When the startup screen disappears, the video from the attached computer will display. If there is no incoming video, the “Check Video Cable” message will display on the projection screen.

MP1600 Microportable Projector 1-9

+ 35 hidden pages