Compaq G200 User Manual

This addendum provides Compaq-specific information for the Matrox G200 Multi­Monitor Series graphics controller. Where noted, information in this addendum
supercedes respective sections in the Matrox G200 Multi-Monitor Series User
Guide.

NOTE:

references to the TV Tuner and any related connectors or applications in the Matrox G200
Multi-Monitor Series User Guide.

Kit Contents

The following items are included in your option kit:

■

Matrox G200 Multi-Monitor Series Graphics Controller

Addendum to the Matrox G200 Multi-

Monitor Series User Guide

Your option kit does not support the Matrox TV Tuner. Please disregard all

■

Two analog monitor cables

■

This Addendum

■

Limited Warranty

NOTE:

To connect the Matrox G200 Multi-Monitor Series graphics controller to a digital
monitor with a Digital Visual Interface (DVI), you will need to purchase option kit 170840­B21. This kit contains two adapter cables that support up to 4 digital monitors with DVI
connectors.

Addendum to the Matrox G200 Multi-Monitor Series User Guide-2

Supporting Documentation

Additional documents are available on the Matrox G200 MMS Graphics CD
included with your option kit to assist you with hardware or software installation:

■

Matrox G200 Multi-Monitor Series User Guide

■

README.TXT file

It is recommended that you read and print the hardware and software installation
procedures from the User Guide before you install the Matrox G200 Multi-Monitor
Series graphics controller.

System Requirements

NOTE:

The following information supercedes the respective section in the user guide.

Your system configuration must meet the following
ensure proper performance of your Matrox G200 Multi-Monitor Series graphics
controller.

Platform Compaq Deskpro EN Series Small Form Factor

Processor
Type/Speed

ROM You may need to upgrade your ROM. For more information refer to

Operating System Microsoft Windows NT 4.0 with Service Pack 4, Microsoft Windows

Software Installation

Upgrading the ROM

Prior to installing new components, you should always check to see if you have the
latest ROM installed. Recent ROMPaq releases can be downloaded from:

www.compaq.com/support/files

minimum

requirements to

Minimum System Configuration

Compaq Deskpro Workstation AP250

Compaq Professional Workstations AP550, SP750

Intel Pentium III or Pentium III Xeon processor, 500-MHz or above

the section titled “Upgrading the ROM” below.

98/95