Pointing Devices and Keyboard
User Guide
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: July 2007
Document Part Number: 440786-001
Product notice
This user guide describes features that are common to most models. Some features may not be
available on your computer.
iii
iv Product notice
Table of contents
1 Using the pointing devices
Setting pointing device preferences ..................................................................................................... 1
Using the pointing stick ........................................................................................................................ 1
Connecting an external mouse ............................................................................................................. 2
2 Using the keyboard
Using the keyboard light ....................................................................................................................... 3
Using hotkeys ....................................................................................................................................... 5
Displaying system information (fn+esc) ............................................................................... 6
Initiating Sleep (fn+f3) .......................................................................................................... 6
Switching the screen image (fn+f4) ..................................................................................... 7
Viewing battery charge information (fn+f8) .......................................................................... 7
Decreasing screen brightness (fn+f9) .................................................................................. 7
Increasing screen brightness (fn+f10) ................................................................................. 7
Activating the ambient light sensor (fn+f11) ........................................................................ 7
3 HP Quick Launch buttons
Presentation button .............................................................................................................................. 8
Info button ............................................................................................................................................ 9
Using QuickLook (select models only) ............................................................................................... 10
Installing QuickLook ........................................................................................................... 10
Using the Quick Launch Buttons control panel .................................................................................. 11
Opening the Quick Launch Buttons control panel ............................................................. 11
Displaying the Q Menu ...................................................................................................... 11
Setting the ambient light sensor ........................................................................................ 12
4 Using the pen and tablet controls
Using the pen ..................................................................................................................................... 13
Identifying the pen components ......................................................................................... 13
Holding the pen .................................................................................................................. 13
Performing mouse clicks with the pen ............................................................................... 14
Performing other procedures with the pen ......................................................................... 14
Pressure-sensitivity ............................................................................................................ 14
Calibrating the pen ............................................................................................................. 15
Using the pen holder .......................................................................................................... 15
Setting pen preferences ..................................................................................................... 16
Changing the pen tip .......................................................................................................... 17
v
5 Using the keypads
Using the embedded numeric keypad ................................................................................................ 19
Enabling and disabling the embedded numeric keypad .................................................... 19
Switching key functions on the embedded numeric keypad .............................................. 19
Using an optional external numeric keypad ....................................................................................... 19
6 Cleaning the keyboard
Index ................................................................................................................................................................... 21
vi
1 Using the pointing devices
Component Description
(1) Pointing stick Moves the pointer and selects or activates items on the screen.
(2) Left pointing stick button Functions like the left button on an external mouse.
(3) Right pointing stick button Functions like the right button on an external mouse.
Setting pointing device preferences
Use Mouse Properties in Windows® to customize settings for pointing devices, such as button
configuration, click speed, and pointer options.
To access Mouse Properties, select Start > Control Panel > Hardware and Sound > Mouse.
Using the pointing stick
Press the pointing stick in the direction you want to move the pointer on the screen. Use the left and
right pointing stick buttons as you would the left and right buttons on an external mouse.
Setting pointing device preferences 1
Connecting an external mouse
You can connect an external USB mouse to the computer using one of the USB ports on the computer.
An external mouse can also be connected to the system using the ports on an optional docking device
or expansion product.
2 Chapter 1 Using the pointing devices
2 Using the keyboard
Using the keyboard light
The keyboard light illuminates the computer keyboard in low light conditions.
▲
To open and turn on the keyboard light, press the keyboard light button.
Using the keyboard light 3
▲
To turn off and close the keyboard light, gently press the keyboard light until it clicks into place.
4 Chapter 2 Using the keyboard
Using hotkeys
Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the function keys (3).
The icons on the f3, f4, and f8 through f10 keys represent the hotkey functions. Hotkey functions and
procedures are discussed in the following sections.
NOTE: Your computer may look slightly different from the illustration in this section.
Function Hotkey
Display system information. fn+esc
Initiate Sleep. fn+f3
Alternate between computer display and external display. fn+f4
Display battery information. fn+f8
Decrease screen brightness. fn+f9
Increase screen brightness. fn+f10
Activate ambient light sensor fn+f11
To use a hotkey command on the computer keyboard, follow either of these steps:
●
Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
●
Press and hold down the fn key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
Using hotkeys 5
Displaying system information (fn+esc)
Press fn+esc to display information about system hardware components and the system BIOS version
number.
In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed
as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS
date is sometimes called the system ROM version number.
Initiating Sleep (fn+f3)
CAUTION: To reduce the risk of information loss, save your work before initiating Sleep.
Press fn+f3 to initiate Sleep.
When Sleep is initiated, your information is stored in system memory, the screen is cleared, and power
is conserved. While the computer is in the Sleep state, the power lights blink.
The computer must be on before you can initiate Sleep.
NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed using Power Options in Windows
Control Panel.
To exit Sleep, briefly slide the power switch to the right.
The function of the fn+f3 hotkey can be changed. For example, you can set the fn+f3 hotkey to initiate
Hibernation instead of Sleep.
NOTE: In all Windows operating system windows, references to the sleep button apply to the fn+f3
hotkey.
6 Chapter 2 Using the keyboard
Switching the screen image (fn+f4)
Press fn+f4 to switch the screen image among display devices connected to the system. For example,
if a monitor is connected to the computer, pressing fn+f4 alternates the screen image from computer
display to monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. The fn+f4 hotkey can also alternate images among other devices receiving video information
from the computer.
The following video transmission types, with examples of devices that use them, are supported by the
fn+f4 hotkey:
●
LCD (computer display)
●
External VGA (most external monitors)
Viewing battery charge information (fn+f8)
Press fn+f8 to display charge information for all installed batteries. The display indicates which batteries
are charging and reports the amount of charge remaining in each battery.
Decreasing screen brightness (fn+f9)
Press fn+f9 to decrease screen brightness. Hold down the hotkey to decrease the brightness level
incrementally.
Increasing screen brightness (fn+f10)
Press fn+f10 to increase screen brightness. Hold down the hotkey to increase the brightness level
incrementally.
Activating the ambient light sensor (fn+f11)
Press fn+f11 to activate and deactivate the ambient light sensor.
Using hotkeys 7
3 HP Quick Launch buttons
Presentation button
When you press the presentation button for the first time, the Presentation Settings dialog box opens.
In this dialog box, you can set the button to perform one of the following actions:
●
Open a program, folder, file, or Web site that you specify
●
Choose a power plan.
●
Choose a display setting
The image is displayed simultaneously on the computer screen and on an external device connected
to one of the following ports or jacks:
●
The external monitor port
●
A port or jack on an optional docking device
If you choose not to use the presentation button factory settings, you can reprogram the button to perform
one of the following actions:
●
Open the Q Menu or Info Center
●
Open an e-mail editor
●
Open a search box that allows you to search for a Web site
8 Chapter 3 HP Quick Launch buttons
Info button
When you press the info button for the first time, the Info Center opens, enabling you to open preset
software programs. If you choose not to use this factory setting for the info button, you can reprogram
the button to perform one of the following actions:
●
Open the Q Menu or start the presentation feature
●
Open an e-mail editor
●
Open a search box that allows you to search for a Web site
Info button 9
Using QuickLook (select models only)
NOTE: QuickLook must be installed before you can view the QuickLook information.
QuickLook saves Inbox e-mails and calendar, contact, and task information from Microsoft® Outlook to
your computer's hard drive. When the computer is off, in the Sleep state, or in Hibernation, you can
quickly view this information by pressing the info button on the computer.
NOTE: If you have set a Windows logon password, you will be prompted to enter your password when
you press the info button while the computer is off, in the Sleep state, or in Hibernation.
NOTE: For additional information about QuickLook and setting preferences, refer to the online Help.
Installing QuickLook
To install QuickLook:
1. Select Start > All Programs > Software Setup.
2. Clear all check boxes.
3. Expand Optional Software Applications, and then select HP QuickLook.
4. Click Install.
10 Chapter 3 HP Quick Launch buttons
Using the Quick Launch Buttons control panel
NOTE: Some of the preferences listed on the HP Quick Launch Buttons control panel may not be
supported by the computer.
The HP Quick Launch Buttons control panel manages the following settings:
●
Programming the presentation button and the Info Center button, and preferences for each button
●
Adding, modifying, and removing items on the Q Menu
●
Tiling windows on the Windows desktop
●
Displaying the HP Quick Launch Buttons icon
●
Displaying HP Quick Launch Buttons desktop notifications
●
Enabling or disabling automatic mode change
●
Enabling or disabling quick switch
●
Enabling or disabling the display-resolution change-detection feature
The following sections provide instructions for setting preferences within the control panel. For additional
information about any item on the control panel, click the Help button in the upper-right corner of the
window.
Opening the Quick Launch Buttons control panel
You can open the HP Quick Launch Buttons control panel in any of the following ways:
●
Select Start > Control Panel > Hardware and Sound > Quick Launch Buttons.
●
Double-click the HP Quick Launch Buttons icon in the notification area, at the far right of the
taskbar.
●
Right-click the HP Quick Launch Buttons icon in the notification area, and click Adjust HP Quick
Launch Buttons Properties.
NOTE: On some models, an icon is displayed on the desktop.
Displaying the Q Menu
The Q Menu provides quick access to many of the system tasks accessed with the buttons, keys, or
hotkeys found on most computers.
To display the Q Menu on the desktop:
▲
Right-click the HP Quick Launch Buttons icon and select Launch Q Menu.
Using the Quick Launch Buttons control panel 11
Setting the ambient light sensor
The computer features a built-in light sensor that automatically adjusts the display brightness based on
the lighting conditions in your environment.
You can turn the ambient light sensor on and off in 2 ways:
●
By pressing fn+f11.
●
By right-clicking the Quick Launch Buttons software icon in the notification area, at the far right of
the taskbar, and clicking Turn Ambient light sensor on/off.
You can also add the ambient light sensor on/off function to the Q Menu, as follows:
1. Open the HP Quick Launch Buttons control panel.
2. Click the Q Menu tab.
3. Under Items to display on Q Menu, select Toggle ALS.
12 Chapter 3 HP Quick Launch buttons
4 Using the pen and tablet controls
You can enter and access information on the tablet PC through pen and tablet controls.
Using the pen
You can write with the pen in pen-specific programs, such as the Tablet PC Input Panel, in all Microsoft®
Office applications, and in most other Windows programs and utilities. The information you write on the
screen with the pen can be filed, searched, and shared among most Windows programs.
Identifying the pen components
The pen interacts with the tablet PC whenever the tip (1) or eraser (3) of the pen is approximately 1.27
cm (0.5 inch) from the screen. The pen button (2) emulates the functions of the right button on an external
mouse.
Holding the pen
Hold the pen as if you were writing with a standard pen or pencil. Position the pen in your hand so that
you will not accidentally press the pen button.
As you monitor the movements of the pen, focus on the pointer, not on the tip of the pen.
Using the pen 13
Performing mouse clicks with the pen
▲
To select an item on the screen as you would with the left button of an external mouse, tap the
item with the tip of the pen.
▲
To double-click an item on the screen as you would with the left button of an external mouse, tap
the item twice with the tip of the pen.
▲
To select an item as you would with the right button of an external mouse, press and hold down
the pen button, and then tap the item with the tip of the pen.
Performing other procedures with the pen
In addition to emulating mouse clicks, the pen can be used for the following tasks:
●
To display the pointer location, hold the pen tip immediately over any location on the tablet PC
screen without touching the screen with the pen tip.
●
To display the menu options related to an item on the screen, tap the screen with the pen tip.
●
To write with the pen, write on the screen with the tip of the pen.
●
To press a pen-activated button, tap the button with the tip of the pen.
●
To erase with the pen, hold the pen with the eraser-side down and move the eraser over the writing
that you want to delete.
Pressure-sensitivity
The tablet PC pen is equipped with a pressure-sensitive feature. This means that you can manipulate
the pen to create lines of various thickness, depending upon the amount of pressure you use to write.
NOTE: This feature is only available if the Tablet PC Input Panel software program is enabled.
14 Chapter 4 Using the pen and tablet controls
Calibrating the pen
The pen can function at the default calibration or at a calibration set by another user. However, HP highly
recommends that you use the pen only while it is calibrated to your personal handwriting and mouse
action motions. Calibration optimizes pen performance for all users and particularly for left-handed
users.
To calibrate the pen:
1. Select Start > Control Panel > Hardware and Sound > Tablet PC Settings.
2. At the bottom of the General tab, tap the Calibrate button.
3. Follow the instructions on the screen.
●
Tap the pen in the exact center of each of the calibration markers. The calibration markers
are displayed on the screen as plus signs (+).
●
Be sure to calibrate the pen for use in both portrait and landscape orientations.
NOTE: You can display information about any setting in the Tablet PC Settings window by selecting
the Help button in the upper-right corner of the window, and then selecting a setting.
Using the pen holder
To protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the computer.
Using the pen 15
Setting pen preferences
Pen preferences are set in the Tablet PC Settings window of the operating system. The preferences
include setting the location of on-screen menus for either right-handed or left-handed users, calibrating
the screen for pen use, and optimizing handwriting recognition.
To access pen preferences:
▲
Select Start > Control Panel > Hardware and Sound > Tablet PC Settings.
Pen options are set in the Pen and Input Devices window. The options include speed settings for doubletapping and press and hold pen use, pen pointer options, and flicks settings.
To access pen options:
▲
Select Start > Control Panel > Hardware and Sound > Pen and Input Devices.
The preferences and options you set in the Tablet PC Settings and the Pen and Input Devices window
are specific to the pen and the tablet PC. Pointing device preferences, such as pointer speed, click
speed, and mouse trails, are set in the Mouse Properties window. These preferences apply to any
pointing device in the system.
To access Mouse Properties:
▲
Select Start > Control Panel > Hardware and Sound > Mouse.
16 Chapter 4 Using the pen and tablet controls
Changing the pen tip
Use the clamp packaged with your pen to remove the used tip.
To remove the used pen tip:
1. Use the clamp to grasp the pen tip (1).
2. Pull the tip out of the pen (2).
To insert a new pen tip:
▲
Insert the new tip into the pen until the tip is fully seated.
Using the pen 17
5 Using the keypads
The computer has an embedded numeric keypad and also supports an optional external numeric keypad
or an optional external keyboard that includes a numeric keypad.
NOTE: Your computer may look slightly different from the illustration in this section.
Component Description
(1) Embedded numeric keypad Can be used like the keys on an external numeric keypad.
(2) fn key Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(3) num lock light On: Num lock is on.
(4) num lk key Press with the fn key to enable the embedded numeric keypad.
18 Chapter 5 Using the keypads
Using the embedded numeric keypad
The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad. When
the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by
the icon in the upper-right corner of the key.
Enabling and disabling the embedded numeric keypad
Press fn+num lk to enable the embedded numeric keypad. The num lock light is turned on. Press fn
+num lk again to return the keys to their standard keyboard functions.
NOTE: The embedded numeric keypad will not function while an external keyboard or numeric keypad
is connected to the computer, an optional docking device, or an optional expansion product.
Switching key functions on the embedded numeric keypad
You can temporarily alternate the functions of keys on the embedded numeric keypad between their
standard keyboard functions and their keypad functions by using the fn key or the fn+shift key
combination.
●
To change the function of a keypad key to keypad functions while the keypad is off, press and hold
the fn key while pressing the keypad key.
●
To use the keypad keys temporarily as standard keys while the keypad is on:
◦
Press and hold the fn key to type in lowercase.
◦
Press and hold fn+shift to type in uppercase.
Using an optional external numeric keypad
Keys on most external numeric keypads function differently according to whether num lock is on or off.
(Num lock is turned off at the factory.) For example:
●
When num lock is on, most keypad keys type numbers.
●
When num lock is off, most keypad keys function like the arrow, page up, or page down keys.
When num lock on an external keypad is turned on, the num lock light on the computer is turned on.
When num lock on an external keypad is turned off, the num lock light on the computer is turned off.
To turn num lock on or off on an external keypad as you work:
▲
Press the num lk key on the external keypad, not on the computer.
Using the embedded numeric keypad 19
6 Cleaning the keyboard
WARNING! To reduce the risk of electric shock or damage to internal components, do not use a
vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on
the keyboard surface.
Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that
can become trapped beneath the keys. A can of compressed air with a straw extension can be used to
blow air around and under the keys to loosen and remove debris.
20 Chapter 6 Cleaning the keyboard
Index
A
ambient light sensor
hotkey 7
setting 12
B
battery charge information 7
buttons
info 9
presentation 8
D
display
image, switching 7
screen brightness hotkeys 7
F
fn key 5
function keys 5
H
hotkeys
ambient light sensor 7
battery charge information 7
decreasing screen
brightness 7
description 5
displaying system
information 6
increasing screen
brightness 7
initiating Sleep 6
switching screen image 7
using 5
I
info button 9
Info Center, opening 9
K
keyboard
cleaning 20
keyboard hotkeys, identifying 5
keyboard light 3
keypad, embedded
enabling and disabling 19
identifying 18
switching key functions 19
using 19
keypad, external
num lock 19
using 19
L
lights
keyboard 3
M
mouse, external
connecting 2
setting preferences 1
N
num lock, external keypad 19
P
pen
calibrating 15
changing tip 17
identifying 13
setting preferences 16
using 13
pen holder, using 15
pointing devices
setting preferences 1
using 1
pointing stick
identifying 1
using 1
pointing stick buttons 1
presentation button 8
Q
Q Menu 11
S
screen brightness hotkeys 7
screen image, switching 7
Sleep hotkey 6
system information hotkey 6
V
video transmission types 7
Index 21
Loading...