Compaq 3870, i3970, 6310, 6310i User Manual

HP EMEA Wireless Solutions

Nokia 6310/6310i and

IPAQ

3870/3970 Bluetooth configuration guide

Version 1.2, July 2002

Hewlett Packard EMEA Wireless

How to connect the Nokia 6310/6310i and the

H3870/3970/BT wireless pack to GPRS

Background:

This document will describe how to connect a Nokia 6310 with the new iPAQ 3870/3970 or any other iPAQ with a Bluetooth wireless pack. With this configuration you will be able to connect the Internet using BT as carrier between the devices and GPRS as connection to Internet. This setup can easily be modified to use the GSM network instead of the GPRS.

Prerequisite:

This installation guide was made using the following hardware and software: (If you are using a later version there might be some changes in the steps below) Hardware: iPAQ H3870 or iPAQ with BT wireless pack, Nokia 6310, GPRS subscription

Software: Bluetooth manager (Already installed into ROM on 3870/3970

Versions of Firmware/Software used: iPAQ 3870 with ROM version 2.20.21

Bluetooth manager 1.1 6310i with software release 4.07

Installation guide:

1. If you are using a 3870 jump to step 3. If you are using a 3970 jump to step 4. If you have a BT wireless pack install Bluetooth manager from the iPAQ CD via ActiveSync. Also check whether there is a later version of the driver on the Compaq web site.

http://www.compaq.com/support/files/handhelds/us/index.html. If you have the H3870

the software is already installed into ROM.

Hewlett Packard EMEA Wireless

2. If you are using the Bluetooth wireless pack install”End user upgrade 1” (EUU 1). Download from

http://www.compaq.com/support/files/handhelds/us/download/13464.html. To

determine whether the upgrade is installed check ActiveSync. If you have a server tab under options the upgrade is installed continue with step 4.

3. If you have a 3870 with ROM version 2.15 upgrade to 2.20 by downloading the file from

http://www.compaq.com/support/files/handheldiPAQ/us/download/14999.html. After

the installation continue with step 4

4. On the iPAQ, check if the radio is turned on. If the Bluetooth icon in the lower right corner is dark like in the left picture below it is turned off. Turn it on by pressing the icon and choose “Turn radio ON”. When the radio is turned ON like in the right picture below go to next step.

+ 5 hidden pages