Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies
PS-AMR Series
DIN RAILHARDENED12 OR 24 V
The ComNet™ PS-AMR Series offer a complete range of high quality, low noise
switching mode power supplies of various output sizes ideally suited to the
entire ComNet industrial product range that require either 12 or 24VDC power
input. These rugged units are DIN rail mountable, providing an ideal mounting
configuration to a mating ComNet industrial switch or any product using our range
of DIN rail mounting adapters. The wide ambient operating temperature range
permits installation in most out of plant and unconditioned environments, such as
those found in intelligent transportation systems or factory automation/industrial
control applications. Unconditional line and load protection is provided.
FEATURES
› Universal AC input: 90 to 264 VAC, 47-63Hz
› Mounts on standard 7.5 or 15 mm DIN-rail
› Adjustable output voltage range support
› High operating efficiency; up to 89%
› Small package for limited space installations
› Natural convection cooling; no troublesome fans
› Wide operating temperature range: -40º to +71º C
› 3 Year Warranty
APPLICATIONS
› Power Supplies for ComNet Industrial Products
3 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
PS-AMR Series
Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies
SPECIFICATIONS
All Specifications Typical at Nominal Line, Full Load, 25ºC Unless Otherwise Noted
Power Input
Rated Input Voltage 90 to 264 VAC or 120 to 375 VDC
Input Current 115 / 230 VAC
PS-AMR1-12: 200 / 135 mA
PS-AMR2-12: 450 / 270 mA
PS-AMR3-12: 680 / 410 mA
PS-AMR4-12: 1.1 / 0.6 A
PS-AMR5-12: 1.35 / 0.72 A
PS-AMR1-24: 1.35 / 0.72 A
PS-AMR2-24: 450 / 270 mA
PS-AMR3-24: 680 / 410 mA
PS-AMR5-24: 1.8 / 0.9 A
PS-AMR4-24: 1.1 / 0.6 A
Line Frequency 47 to 63 Hz
Inrush current 115 / 230 VAC
PS-AMR1: 15 / 30 A
PS-AMR2: 20 / 40 A
PS-AMR3: 25 / 50 A
PS-AMR4/5: 30 / 60 A
Power Dissipation 230 VAC
PS-AMR1-12: 2.3 W
PS-AMR2-12: 4.3 W
PS-AMR3-12: 7.3 W
PS-AMR4-12: 10.2 W
PS-AMR5-12: 12. 9 W
PS-AMR1-24: 2.3 W
PS-AMR2-24: 4.0 W
PS-AMR3-24: 7.1 W
PS-AMR424: 9.9 W
PS-AMR5-24: 12. 2 W
Power Input
Voltage Accuracy +1%
Minimum Load 0%
Line Regulation ±1%
Voltage Trim Range For all except the PS-AMR1 models
12 V: 12 to 14 VDC
24 V: 24 to 28 VDC
Hold up time 115 / 230 VAC
PS-AMR1: 10 / 30 ms
PS-AMR2: 20 / 80 ms
PS-AMR3: 20 / 100 ms
PS-AMR4-12: 16 / 60 ms
PS-AMR5-12: 16 / 60 ms
PS-AMR4-24: 12 / 60 ms
PS-AMR5-24: 10 / 60 ms
DC ON / LOW
indicator threshold 12 V: 9 to 10.8 VDC
24 V: 19.2 to 21.6 VDC
General
Isolation Resistance Input-Output, @ 500VDC, 100 MΩ
Derating PS-AMR1/2/5: +61º to 71ºC, max 2.5% / ºC
PS-AMR3/4: +56º to 71ºC, max 2.5% / ºC
Cooling Normal convection
(Recommend all sides 25m/m free space)
Control and Protection
Input fuse 250 VAC internal
PS-AMR1: T1A
PS-AMR2/3/4: T2A
PS-AMR5: T3.15A
Internal Surge Protection IEC 61000-4-5
Rated Over Load Protection PS-AMR1: 110 - 165 %
PS-AMR2: 120 - 160 %
PS-AMR3/4/5: 110 - 150 %
Over voltage protection Auto Recovery
12 V: 15 to 16.5 VDC
24 V: 30 to 33 VDC
Degree of protection IP20
Connector
AWG24-12 (0.2 - 2.5mm²) flexible / solid cable
Indicating LEDs
DC ON At Start Up (Green)
DC LOW After Start Up (Red)
Electrical & Mechanical
Size PS-AMR1 3.58 × 0.71 × 2.22 in (9.1 × 1.8 × 5.65 cm)
PS-AMR2 3.58 × 1.38 × 2.22 in (9.1 × 3.5 × 5.65 cm)
PS-AMR3 3.58 × 2.09 × 2.22 in (9.1 × 5.3 × 5.65 cm)
PS-AMR4 3.58 × 2.8 × 2.22 in (9.1 × 7.1 × 5.65 cm)
PS-AMR5 3.58 × 3.54 × 2.24 in (9.1 × 9.0 × 5.7 cm)
Weight PS-AMR1 0.14 lb / 65 g
PS-AMR2 0.29 lb / 130 g
PS-AMR3 0.42 lb / 190 g
PS-AMR4 0.55 lb / 250 g
PS-AMR5 0.84 lb/ 380 g
Environmental
MTBF >500,000 hours @ 40ºC
Operating Temp -40˚ C to +71˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 20% to 90% (non-condensing)
Approvals & EMC Compliance
UL / cUL UL 508 Listed
UL 60950-I, UL 1310 Class 2 Power (24LS model
only) recognized
ISA 12.12.01 (Class I, Div 2, Groups A, B, C, & D)
TUV EN 60950-I, CB scheme
CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2,
EN 61000-3-3, EN 61000-6-2, EN 55024,
EN 61000-4-2 Level 4, EN 61000-4-3 Level 3,
EN 61000-4-4-4 Level 4, EN 61000-4-5 L-N Level 3,
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4,
EN 61000-4-11, ENV 50204 Level 2, EN 61204-3
Vibration Meets IEC 60068-2-6
Rail Mount: 10 - 500 Hz, 2G, 60 min for each Axis
Shock Meets IEC 60068-2-27
15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face
3 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
PS-AMR Series
PIN ASSIGNMENTS
Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies
PS-AMR1
PIN Designation Description
1
2 + Positive output terminal
3
4 N Input terminals (neutral conductor, no polarity at DC input)
- Negative output terminal
OUT
L Input terminals (phase conductor, no polarity at DC input)
IN
DC ON Operation indicator LED
OTHER
DC LO DC Low indicator LED
PS-AMR2/3/4/5
PIN Designation Description
1
2 - Negative output terminal
OUT
3 + Positive output terminal
4 + Positive output terminal
5
IN
6 N Input terminals (neutral conductor, no polarity at DC input)
OTHER
DERATING CURVES
PS-AMR1/2/5 PS-AMR3/4
100
75
100
62.5
- Negative output terminal
L Input terminals (phase conductor, no polarity at DC input)
Vout ADJ. Trimmer-potentiometer for Vout adjustment
DC ON Operation indicator LED
DC LO DC Low indicator LED
Power Out (%)
0
-40 61 71
Temperature (ºC)
Power Out (%)
0
-40 56 71
Temperature (ºC)
ORDERING INFORMATION
Part Number Input Voltage Output Wattage Output Voltage Output Current Eff. (min) Eff. (typ)
PS-AMR1-12 90 to 264 VAC 10 Watts + 12 VDC 830 mA 76% 78%
PS-AMR2-12 90 to 264 VAC 24 Watts + 12 VDC 2000 mA 82% 84%
PS-AMR3-12 90 to 264 VAC 33 Watts + 12 VDC 2750 mA 80% 80%
PS-AMR4-12 90 to 264 VAC 54 Watts + 12 VDC 4500 mA 82% 84%
PS-AMR5-12 90 to 264 VAC 72 Watts + 12 VDC 6000 mA 83% 86%
PS-AMR1-24 90 to 264 VAC 10 Watts + 24 VDC 420 mA 78% 80%
PS-AMR2-24 90 to 264 VAC 24 Watts + 24 VDC 1000 mA 83% 85%
PS-AMR3-24 90 to 264 VAC 36 Watts + 24 VDC 1500 mA 81% 84%
PS-AMR4-24 90 to 264 VAC 60 Watts + 24 VDC 2500 mA 84% 86%
PS-AMR5-24 90 to 264 VAC 100 Watts + 24 VDC 4200 mA 86% 89%
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ,” the “Com Net Logo,” “Net Wave” and the “N etWave Logo” ar e registere d trademark s of Communica tion Networ ks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
06 Nov 2014
Loading...