Comnet NWK9, NWK9E Specsheet

Ultra-High Throughput, Impact-Resistant
Hardened Wireless Ethernet Kit
NWK9[E]
2IP67802.3af/at802 .11ac-40º TO +7 0º 15W
The NetWave® NWK9[E] ultra-high throughput, impact-resistant hardened wireless Ethernet transmission kit comes preconfigured with one Client and one Access Point. This single radio model was designed for high throughput point-to-point applications and comes with an integrated 19dBi, 17º beamwidth antenna. The NWK9[E] supports up to 500 Mbps throughput using 802.11ac MIMO technology. The units can be powered by an 802.3af/at PoE compliant device or through a sold­separately PoE injector with the second Ethernet port serving as an IEEE802.3af power source. The NWK9 is FCC certified for use in North America and the NWK9E is ETSI, DFS and TPC certified for use in the European Union.
FEATURES
› Up to 500 Mbps throughput
› Lifetime Warranty
› Sturdy cast aluminum enclosure
› IEEE802.3at PoE Compliant PD
› Over current protection and 3 layers of Ethernet surge
suppression on the PD port
› Distances up to 2 mi (FCC) or 2 km (ETSI)
› Distances up to 4 mi (FCC) with MAC Lock enabled
› Environmentally Hardened -40º to +70ºC
› Meets class IP67 dust and water immersion protection
standards
› ETSI Standards (EU Region only):
– DFS Dynamic Frequency Selection – TPC Transmit Power Control
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation and
setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› LED array displays unit operational status along with received
signal strength
APPLICATIONS
› High Throughput Back Haul Link for installations that require
connecting to more than one Ethernet device
› Ideal for PoE Camera connectivity
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› Multicast traffic-based video systems
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other industrial automation and control applications operating in harsh or out-of-plant environments
› Electrical substation video and perimeter surveillance
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
NWK9[E]
SPECIFICATIONS
Ultra-High Throughput, Impact-Resistant
Hardened Wireless Ethernet Kit
5GHz Wireless Radio
EIRP NW9 (FCC): +49dBm for point to point
deployments with MAC-lock feature enabled
NW9E (ETSI): +30dBm RF Output +30dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region. Bandwidths 10, 20, 40, and 80MHz
Internal Antenna
Antenna Internal 19dBi Dual Polarized Directional Gain 19dBi Azimuth 17º Horizontal/Vertical Elevation 17º Horizontal/Vertical
Connectors
Gigabit Ethernet 2 × RJ-45, Sealed Cable Gland
Software Features
Addressing Static IP / DHCP Client / DHCP Server SNMP V3 Spanning Tree Protocol support Telnet Server Syslog
802.1x Port-Based Network Access Control NTP Client User-Configurable Watchdog and Auto-Reboot Mechanism Multi-Level Configuration and Monitoring Login Accounts User Configurable Long Range Parameters
Power
Operating Power 48 to 57 VDC @ 170 mA Power Consumption 8 W Max (with no PD load connected to port 2) PD Power IEEE802.3af/at PD compliant PSE Power IEEE802.3af PSE compliant
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength Size (L × W × H) 10.27 × 10.27 × 1.38 in (26.1 × 26.1 × 3.5 cm) Shipping Weight: <11 lb / 5 kg
Environmental
MTBF >100,000 hours Operating Temp -40° C to +70° C Storage Temp -40° C to +85° C Relative Humidity 5% to 95%, non-condensing¹
ORDERING INFORMATION
Part Number Description
NWK9 Hardened Radio Kit with one Access Point (NWK9_AP) and one Client (NWK9_CL), FCC cer tified for use in NA Region
NWK9E Hardened Radio Kit with one Access Point (NWK9_AP) and one Client (NWK9_CL), E TSI certified for use in EU Region
Included Accessories Mounting Hardware Kit (For Pole Mounting Only)
Options CNGE1IPS - 35W PoE Injector (sold separately)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)
NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
NWK9[E]
TYPICAL APPLICATIONS
High Throughput Point-to-Point Topology (Shown with PoE Cameras)
Ultra-High Throughput, Impact-Resistant
Hardened Wireless Ethernet Kit
Ethernet
1Gbps
Ethernet
PoE
ComNet Gigabit
Managed Switch
providing 30W PoE
Connected to Network
NWK9_AP NWK9_CL
P1 P1
LEGEND
Wireless
Cat5
Power
Ethernet
P1
PORT 1 PD
P2
PORT 2 PSE
Point-to-Point Topology (Shown with PoE Injector and PoE Powered Cameras)
NWK9_CL
P1
P2
ComNet Managed
Switch with 30W PoE
Connected to Network
1Gbps
Ethernet
PoE
NWK9_AP
1Gbps
Ethernet
PoE
ComNet Gigabit
Managed Switch
providing 30W PoE
CNGE1IPS or
Ethernet Ethernet
PoE
any PSE device
Ethernet
PoE
Ethernet
PoE
PoE
PoE Camera
. . . . . .
PoE Camera
Power
IP Camera
PoE Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
05 Nov 2015
Loading...