Mini Environmentally Hardened
High Throughput Wireless Ethernet Kit
NWK7[E]/M
1IP67802.3af-40º TO 70ºC
The NetWave® NWK7[E]/M environmentally hardened High Throughput (HT)
wireless Ethernet transmission kit includes a Client and an Access Point. This single
radio model is pre-configured for high throughput point-to-point applications and
comes with an integrated 16dBi, 30º beamwidth antenna. The NW7[E]/M supports
up to 240Mbps throughput using MIMO technology. The units can be powered
by an 802.3af PoE compliant device or through a sold separately PoE injector. The
NWK7/M is FCC certified for use in North America and the NWK7E/M is ETSI, DFS
and TPC certified for use in the European Union. The NWK7[E]/M is an ultra-small
form factor addition to the ComNet NetWave product family.
FEATURES
› High throughput:
- Up to 180 Mbps in one direction
- Up to 240 Mbps total full duplex
› Lifetime Warranty
› IEEE802.3af PoE Compliant PD
› 802.11a/n Compliant
› Distances up to 2 mi (FCC) or 2km (ETSI)
› Environmentally Hardened -40º to +70ºC
› Meets class IP67 dust and water immersion protection
standards
› ETSI Standards (EU Region only):
– DFS Dynamic Frequency Selection
– TPC Transmit Power Control
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation
and setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› LED array displays unit operational status along with received
signal strength
APPLICATIONS
› High Throughput Back Haul Link for installations that require
connecting to more than one Ethernet device
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› Multicast traffic-based video systems
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other industrial
automation and control applications operating in harsh or
out-of-plant environments
› Electrical substation video and perimeter surveillance
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
NW7[E]/M
SPECIFICATIONS
Mini Environmentally Hardened
High Throughput Wireless Ethernet Device
5GHz Wireless Radio
EIRP NWK7/M (FCC): Up to +36dBm for point to
multipoint deployments, +46dBm for point to
point deployments with MAC-lock feature enabled
NWK7E/M (ETSI): +30dBm
RF Output 30dBm Rated Transmitter
Operational Frequency 5180MHz – 5825MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 20 and 40MHz
Internal Antenna
Antenna Internal 16dBi Dual Polarized Directional
Gain 16dBi
Azimuth 30º Horizontal/Vertical
Elevation 30º Horizontal/Vertical
Connectors
Gigabit Ethernet RJ-45, Sealed Cable Gland
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Power
Operating Power 42 to 57 VDC
Power Consumption 8W Max
PD Power IEEE802.3af PD compliant
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 7.4 × 7.4 × 2.2 in (18.5 × 18.5 × 5.6 cm)
Shipping Weight: <7.7 lb / 3.5 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +70° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
ORDERING INFORMATION
Part Number Description
NWK7/M
NWK7E/M
Included Accessories Mounting Hardware Kit (For Pole Mounting Only)
Options CNGE1IPS - 35W PoE Injector (sold separately)
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
High Throughput Point-to-Point Topology (Shown with PoE Cameras)
ComNet Gigabit Managed Switch
providing 30W PoE
Connected to Network
Legend
Hardened Mini Point-to-point kit, Gb Ethernet Port, internal 16dBi 30° beamwidth direc tional antenna, includes pole mounting assembly, Support s
802.3af PD PoE Power, FCC certified for use in NA Region
Hardened Mini Point-to-point kit, Gb Ethernet Port, internal 16dBi 30° beamwidth direc tional antenna, includes pole mounting assembly, Support s
802.3af PD PoE Power, ETSI cer tified for use in EU Region
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)
ComNet Gigabit Managed
Switch providing 30W PoE
PoE
Wireless
CAT5
1Gbps
Ethernet
PoE
NWK7/M
(Access Point)
Power
Ethernet
NWK7/M
(Client)
1Gbps
Ethernet
Ethernet
PoE
Ethernet
PoE
PoE Camera
.
.
.
.
.
.
PoE Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
05 Nov 2015