Page 1
Industrially Hardened
Point-to-Point Wireless Ethernet Kit
NWK1/NWK2
1IP67INCLUDED 802.3af/at-40º TO 75ºC
The NetWave® pre-configured point-to-point industrially hardened wireless
Ethernet Transmission kit that allows Ethernet data to be transmitted between a
Client remote location and the Access Point or head end. The NWK1 and NWK2
support up to 95 Mbps throughput due to MIMO technology. An easy to read
LED array displays unit operational status along with received signal strength
ensuring optimal installation and operation. The units can be powered by an IEEE
802.3af PoE compliant device or through the supplied power injection module. The
NWK1 is FCC certified for use in North America and the NWK2 is ETSI, DFS and
TPC certified for use in the European Union. Each kit contains two passive power
injectors, power supplies and mounting hardware.
FEATURES
› Pre-configured Access Point and Client units for quick setup
› Up to 95 Mbps Throughput
› 802.11a/n Compliant
› Distances up to 2 mi (FCC) or 2km (ETSI)
› Powered by the included power injection module or by an
IEEE802.3af PoE compliant device
› Environmentally Hardened -40º to +75ºC
› Meets class IP67 dust and water immersion protection
standards
› ETSI Standards (EU Region only):
– DFS Dynamic Frequency Selection
– TPC Transmit Power Control
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation and
setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› LED array displays unit operational status along with
received signal strength
› Radio Internal Components covered by Lifetime Warranty.
› Enclosure covered by Three Year Warranty.
APPLICATIONS
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other
industrial automation and control applications operating in
harsh or out-of-plant environments
› Electrical substation video and perimeter surveillance
LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Page 2
NWK1/NWK2
A
SPECIFICATIONS
Industrially Hardened Point-to-Point
Wireless Ethernet Kit
Wireless Radio
EIRP NW1 (FCC): Up to +36dBm for point to multipoint
deployments, +45dBm for point to point
deployments with MAC-lock feature enabled
NW2 (ETSI): +30dBm
RF Output +26dBm Rated Transmitter
Operational Frequency 5180MHz – 5825MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 20 and 40MHz
Standard Internal Antenna
Antenna Internal 19dBi Dual Polarized Directional
Gain 19dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical
Connectors
10/100 Ethernet 2 × RJ-45, Sealed Cable Gland
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Power
Operating Voltage 42 to 57 VDC
Power Consumption 5.5W Max
PD Power IEEE802.3af PD compliant
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)
Shipping Weight: <8.8 lb / 4 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
Warranty
Internal Components Lifetime
Enclosure 3 Year
GENCY COMPLIANCE
ORDERING INFORMATION
Part Number Description
NWK1
NWK2 Industrially Hardened Point-to-Point Wireless Ethernet Kit, distances up to 2 km/1.25 mi, ETSI cer tified for European Union
Included Accessories 2 × Power Kit with Power Supply and Passive Power Injector
Options NWBKT - Articulating Wall Mount Bracket (Sold Separately)
Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
PC NVR ComNet Gigabit
© 2017 Communica tion Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.
Industrially Hardened Point-to-Point Wireless Ethernet Kit, distances up to 2 mi/3.2 km.
Consult ComNet tech support for sys tem designs beyond 2 mi/3.2 km. FCC cer tified for North America
2 × Pole Mounting Hardware Kit
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)
Client
Managed Switch
with 30W PoE+
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
10/100 Ethernet
|
GILDERSOME
PoE
|
MORLEY
Access Point)
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
Legend
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
Ethernet Ethernet
Wireless
CAT5
PoE
PIM or other
PSE device
|
INFO@COMNET.NET
|
INFO-EUROPE@COMNET.NET
Power
IP Camera
Power
Ethernet
24 Apr 2017
Loading...