Comnet NWK1-M, NWK2-M Specsheet
Mini Industrially Hardened Point-to-Point
Wireless Ethernet Kit
NWK1/M and NWK2/M
1IP67INCLUDED 802.3af-40º TO 75ºC
The NetWave® industrially hardened wireless Ethernet transmission kit includes
a Client and an Access Point. The NWK1/M and NWK2/M support up to 95Mbps
throughput using MIMO technology. The units can be powered by an IEEE 802.3af
PoE compliant device or through the supplied power injection module. The
NWK1/M is FCC certified for use in North America and the NWK2/M is ETSI, DFS
and TPC certified for use in the European Union. This mini unit come in an ultrasmall form factor that is a new addition to the ComNet NetWave product family.
FEATURES
› Lifetime Warranty
› Up to 95Mbps Throughput
› 802.11a/n Compliant
› Distances up to 2 mi (FCC) or 2km (ETSI)
› Powered by the included power injection module or by an
IEEE802.3af PoE compliant device
› Environmentally Hardened -40º to +75ºC
› Meets class IP67 dust and water immersion protection
standards
› ETSI Standards (EU Region only):
– DFS Dynamic Frequency Selection
– TPC Transmit Power Control
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation and
setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› LED array displays unit operational status along with received
signal strength
APPLICATIONS
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other industrial
automation and control applications operating in harsh or
out-of-plant environments
› Electrical substation video and perimeter surveillance
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
NWK1/M and NWK2/M
SPECIFICATIONS
Mini Industrially Hardened Point-to-Point
Wireless Ethernet Kit
Wireless Radio
EIRP NWK1/M (FCC): Up to +36dBm for point to
multipoint deployments, +42dBm for point to
point deployments with MAC-lock feature enabled
NWK2/M (ETSI): +30dBm
RF Output +26dBm Rated Transmitter
Operational Frequency 5180MHz – 5825MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 20 and 40MHz
Standard Internal Antenna
Antenna Internal 16dBi Dual Polarized Directional
Gain 16dBi
Azimuth 30º Horizontal/Vertical
Elevation 30º Horizontal/Vertical
Connectors
10/100 Ethernet RJ-45, Sealed Cable Gland
Indicating LEDs Power On, Ethernet Link, Signal Strength
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Power
Operating Voltage 42 to 57 VDC
Power Consumption 5.5 W Max
PD Power IEEE802.3af PD compliant
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 7.4 × 7.4 × 2.2 in (18.5 × 18.5 × 5.6 cm)
Shipping Weight <7.7 lb / 3.5 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
ORDERING INFORMATION
Part Number Description
NWK1/M Industrially Hardened Mini Point-to-Point Wireless Ethernet Kit, Suppor ts distances up to 2 mi/3.2 km, FCC certified for Nor th America
NWK2/M Industrially Hardened Mini Point-to-Point Wireless Ethernet Kit, Suppor ts distances up to 2 km/1.25 mi, ETSI certified for European Union
Included Accessories Power Kit with Power Supply and Passive Power Injector for each unit
Pole Mounting Hardware Kit
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)
NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
ComNet Managed
Switch with 30W PoE
Connected to Network
10/100 Mbps
Ethernet
PoE
NWK1/M
(Access Point)
NW1K/M
(Client)
PIM or other
PSE device
Ethernet Ethernet
PoE
Legend
Wireless
CAT5
Power
IP Camera
Power
Ethernet
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
30 Nov 2015
Loading...