Comnet NWK11-M, NWK11E-M, NWK11IC-M Specsheet

Mini Industrially Hardened Point-To-Point

Wireless Ethernet Kit for Short Range Deployments

NWK11/M Kit

1IP67-40º TO 75ºC PASSIVE POE

The NetWave® NWK11/M mini industrially hardened wireless kit is a low cost
option for short range deployments that requires full featured radio performance.
The wide range of channel spectrum widths available on the NWK11/M package
of radios gives you the option of narrowing channel bandwidths as your network
grows which will increase the number of non-overlapping channels and improve
stability. The NWK11/M series radio kit comes standard with integrated antennas
and IP67 rated impact resistant ABS enclosures designed to survive the most
extreme conditions.

The NWK11/M is FCC certified for use in North America, NWK11IC/M is IC Certified
for use in Canada, and the NWK11E/M is ETSI, DFS and TPC certified for use in the
European Union.

FEATURES

› Complete wireless kit consisting of two radios, power

supplies, and mounting hardware.

› 5, 10, 20 and 40 Mhz Channel Bandwidth Support

› Scalable - Narrow Channel 5 and 10 MHz Bandwidths will

allow you to expand your WLAN without losing reliability by
increasing the total number of non-overlapping channels

› Up to 100 Mbps Throughput

› 802.11a/n Compliant

› Distances up to .5 mi(FCC) or .8km (ETSI and IC)

› Passive PoE on Port 1

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› LED array displays unit operational status along with

received signal strength

› Firmware Upgrades Included Free for the life of the product

› Installation and Configuration Trainings Available

› Radio Internal Components covered by Lifetime Warranty.

› Enclosure covered by Three Year Warranty.

APPLICATIONS

› Short-Range Video Surveillance

› Multipurpose Networks

› ITS Applications

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

NWK11/M Kit

A

SPECIFICATIONS

Mini Industrially Hardened Point-To-Point

Wireless Ethernet Kit for Short Range Deployments

Software Features

Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support

802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters

Wireless Radio

EIRP NWK11/M (FCC): Up to +36 dBm for point to

multipoint deployments, +46 dBm for point to
point deployments with MAC-lock feature enabled
NWK11IC/M (IC): +30dBm

NWK11E/M (ETSI): +30 dBm
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.

Not all frequencies are supported in all regions.

Contact ComNet for frequencies supported in your

region.
Bandwidths 5, 10, 20 and 40 MHz

Standard Internal Antenna

Antenna Internal 16 dBi Dual Polarized Directional
Gain 16 dBi
Azimuth 30º Horizontal/Vertical
Elevation 30º Horizontal/Vertical

Connectors

10/100 Ethernet RJ-45, Sealed Cable Gland

Power

Operating Voltage 24 to 56 VDC
Power Consumption 5 W Max
PD Power Passive PoE

Mechanical

Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 7.4 × 7.4 × 2.2 in (18.5 × 18.5 × 5.6 cm)
Shipping Weight: <7.8 lb / 3.5 kg

Environmental

MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹

Warranty

Internal Components Lifetime
Enclosure 3 Year

GENCY COMPLIANCE

ORDERING INFORMATION

Part Number Description

NWK11/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Suppor ts distances up to 0.5 mi/800 m, FCC certified for Nor th America

NWK11IC/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Suppor ts distances up to 0.5 mi/800 m, IC certified for Canada

NWK11E/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Suppor ts distances up to 0.5 mi/800 m, ETSI certified for European Union

Included Accessories 2 Pole Mounting Hardware Kits

2 Non Hardened Pas sive Power Injector s (1 for each radio) for use in benign 0-50º C environments only.

Options PIM1 - Hardened Power Injection Module suppor ting 24-48V DC and 24VAC Input, Includes 24V 12W power supply

[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)

NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

ComNet Managed
Switch Connected

to Network

PIM*

*Does not support PSE

P1

NWK11/M

(Access Point)

NWK11/M

(Client)

P1

PIM*

LEGEND

WIRELESS

CAT5

POWER

ETHERNET 50Ω COAX

IP Camera

P1

PORT 1 PD

Power

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

31 Jul 2018© 2018 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ,” the “C omNet Logo,” “N etWave” and the “ NetWave Lo go” are regist ered trademar ks of Communic ation Netw orks.