Comnet NWK1, NWK2 Specsheet

Page 1

Industrially Hardened

Point-to-Point Wireless Ethernet Kit

NWK1/NWK2

1IP67INCLUDED 802.3af/at-40º TO 75ºC

The NetWave® pre-configured point-to-point industrially hardened wireless Ethernet Transmission kit that allows Ethernet data to be transmitted between a Client remote location and the Access Point or head end. The NWK1 and NWK2 support up to 95 Mbps throughput due to MIMO technology. An easy to read LED array displays unit operational status along with received signal strength ensuring optimal installation and operation. The units can be powered by an IEEE

802.3af PoE compliant device or through the supplied power injection module. The NWK1 is FCC certified for use in North America and the NWK2 is ETSI, DFS and TPC certified for use in the European Union. Each kit contains two passive power injectors, power supplies and mounting hardware.

FEATURES

› Lifetime Warranty

› Pre-configured Access Point and Client units for quick setup

› Up to 95 Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Powered by the included power injection module or by an

IEEE802.3af PoE compliant device

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection – TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation and

setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with

received signal strength

APPLICATIONS

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial automation and control applications operating in harsh or out-of-plant environments

› Electrical substation video and perimeter surveillance

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

Page 2

NWK1/NWK2

SPECIFICATIONS

Industrially Hardened Point-to-Point

Wireless Ethernet Kit

Wireless Radio

EIRP NW1 (FCC): Up to +36dBm for point to multipoint

deployments, +45dBm for point to point deployments with MAC-lock feature enabled

NW2 (ETSI): +30dBm RF Output +26dBm Rated Transmitter Operational Frequency 5500GHz - 5825GHz, Region-dependent.

Not all frequencies are supported in all regions.

Contact ComNet for frequencies supported in your

region. Bandwidths 20 and 40MHz

Standard Internal Antenna

Antenna Internal 19dBi Dual Polarized Directional

Gain 19dBi

Azimuth 17º Horizontal/Vertical Elevation 17º Horizontal/Vertical

Connectors

10/100 Ethernet 2 × RJ-45, Sealed Cable Gland

Indicating LEDs Power On, Ethernet Link, Signal Strength

Software Features

Addressing Static IP / DHCP Client / DHCP Server SNMP V3 Telnet Server Syslog Dynamic DNS 802.1q VLAN support Embedded Firewall QoS support Ability to Assign Static Routes NTP Client Spanning Tree Protocol support

802.1x Port-Based Network Access Control User-Configurable Watchdog and Auto-Reboot Mechanism Multi-Level Configuration and Monitoring Login Accounts User Configurable Long Range Parameters

Power

Operating Voltage 42 to 57 VDC Power Consumption 5.5W Max PD Power IEEE802.3af PD compliant

Mechanical

Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)

Shipping Weight: <2lbs/0.9kg

Environmental

MTBF >100,000 hours Operating Temp -40° C to +75° C Storage Temp -40° C to +85° C Relative Humidity 5% to 95%

Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

ORDERING INFORMATION

Part Number Description

NWK1

NWK2 Industrially Hardened Point-to-Point Wireless Ethernet Kit, distances up to 2 km/1.25 mi, ETSI certified for European Union

Included Accessories

Options

Industrially Hardened Point-to-Point Wireless Ethernet Kit, distances up to 2 mi/3.2 km. Consult ComNet tech support for system designs beyond 2 mi/3.2 km. FCC certified for North America

2 × Power Kit with Power Supply and Passive Power Injector 2 × Mounting Hardware Kit NWBKT - Articulating Wall Mount Bracket (Sold Separately)

TYPICAL APPLICATION

Client

PC NVR ComNet Gigabit

Managed Switch

with 30W PoE+

10/100 Ethernet

PoE

Access Point)

LEGEND

WIRELESS

CAT5

Ethernet Ethernet

PoE

PIM or other PSE device

POWER

ETHERNET

Power

IP Camera

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

TECH SUPPORT: 1.888.678.9427

F: +44 (0)113 253 7462

INFO-EUROPE@COMNET.NET

INFO@COMNET.NET

20 Jul 2015