Comnet NW9IC Specsheet

Video

|

Audio

|

Data

|

Ethernet

Wireless Ethernet Transmission

Industrially Hardened Wireless Ethernet Transmission

Power, Point and Play.

Power up and point the units and

start transmitting Ethernet.

The ComNet NetWave® line consists of an
easy, pre-packaged Point-to-Point kit that
contains everything you need to establish
remote connectivity to Ethernet edge devices.
Also available are Point-to-Multipoint models
that allow multiple client/camera/networked
edge device locations to connect to a single
access point.

NetWave® supports total throughput of 100,
240, or 500 Mbps in a single radio version and
up to 240 Mbps in the dual radio models. A
wide range of Ethernet devices are supported.
NetWave® is secure and uses encryption to
prevent unauthorized access to the network.
These industrially hardened units with Ethernet
Interfaces offer the option to be powered by a
PoE switch or a Midspan Power Injector.

Features

› Industrially hardened 5GHz solutions

for outdoor applications
› Up to +30 dBm RF output power
› Distances up to 2 mi (FCC) or 2 km (ETSI)
› Distances up to 4 mi (FCC) with MAC

lock enabled on Point-to-Point Kits
› Internal directional antenna:

› 20 dBi 17° beamwidth for full size units

› 16 dBi 30° beamwidth for mini units

› External antennas available for

added configuration flexibility

Product Category Page

Point-to-Point Kits 3

Point-to-Multipoint 4

Ultra High Throughput 5

High Throughput 6

Solar Power 7

Accessories 7

› Secure transmission: WPA2 –

AES or TKIP encryption

› Exclusive ComNet antenna alignment

feature eases installation and setup

› Distance adjustments for long-

range transmission

› IEEE 802.3at (PSE) compliant support

(NW1/2, NW1DR, NW9[E] series)

› Ruggedized heavy duty enclosures

meet class IP67 dust and water
ingress protection standards

› Lifetime Warranty

2

www.comnet.net

NetWave® Kits: A Complete Hardened Point-to-Point Wireless Ethernet Solution

These preconfigured industrial kits include a factory-paired Access Point and Client, plus the
power supplies and mounting equipment to install and connect them.

The NetWave® NWK series offers a complete package solution containing everything you need
to transmit a single Ethernet data stream between a Client remote location and the Access Point
or head end. A simple antenna alignment feature provides easy to read visual indicators that
show when the antennas are correctly aligned and the link is established.

Kit Includes

› Client (Remote) and Access Point (Head End)
› NWK9 features ruggedized IP67

rated heavy duty enclosures
› Internal Dual Polarized Directional Antenna
› Distances up to 2 mi (FCC) or 2 km (ETSI)

› Distances up to 4 mi (FCC) with MAC

lock enabled on Point-to-Point Kits
› Two mounting hardware assemblies
› Units can optionally be powered by an

IEEE 802.3at/IEEE 802.3af PoE switch
› Lifetime Warranty

NetWave® Wireless Ethernet Point-to-Point Kits

Product Group NWK1 NWK1/M NWK2 NWK9 NWK11/M

Operating Temp Range -40° to +75° C -40° to +75° C -40° to +75° C -40° to +70° C -40° to +75° C

Power 24-48 VDC IEEE 802.3af/at Passive PoE

Internal Dual Polarized
Directional Antenna /
Beamwidth

Throughput Total
(Under Ideal Conditions)

This chart references FCC NetWave models. For ETSI models, please refer to the appropriate data sheets or contact ComNet’s International Design Center.

20 dBi / 17º 16 dBi / 30º 20 dBi / 17º 20 dBi / 17º 16 dBi / 30º

240 Mbps 240 Mbps 240 Mbps 500 Mbps 100 Mbps

Typical Point-to-Point Application

Power

PC NVR ComNet Gigabit

LEGEND

WIRELESS

CAT 5

POWER

ETHERNET 50Ω COAX

P1

P2

Managed Switch
with 30 W PoE+

PORT 1 PD

PORT 2 PSE

P1 P1

Access Point

Client

PIM or other
PSE device

IP Camera

3