Comnet NW10, NW10E Specsheet

Industrially Hardened High Performance

Wireless for High Density Environments

NW10[E]

1 1IP67-40º TO 75ºC IEEE802.3atIEEE802.3at

The NetWave® NW10[E] Industrial Grade high performance wireless radio is ideal for
high capacity and scalable deployments where channel overlapping and interference
typically cause our discounted competitors radios to become unstable. The wide range
of channel spectrum widths available on the NW10[E] series of radios gives you the
option of narrowing channel bandwidths as your network grows which will increase the
number of non-overlapping channels and improve stability.

The NW10[E] comes standard with an integrated antenna and an IP67 rated impact
resistant ABS enclosure that is designed to survive the most extreme conditions.

The NW10 is FCC certified for use in North America and the NW10E is ETSI, DFS and
TPC certified for use in the European Union.

FEATURES

› Narrow Channel Spectrum Widths for large and noisy

deployments

› 5, 10, 20 and 40 Mhz Channel Bandwidth Support

› Up to 240 Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› IEEE802.3at PoE Compliant PD on port 1

› IEEE802.3af power source (PSE) available on port 2

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with

received signal strength

› Scalable - Narrow Channel 5 and 10 MHz Bandwidths will

allow you to expand your WLAN without losing reliability by
increasing the total number of non-overlapping channels

› Firmware Upgrades Included Free for the life of the product

› Installation and Configuration Trainings Available

› Radio Internal Components covered by Lifetime Warranty.

› Enclosure covered by Three Year Warranty.

APPLICATIONS

› High-Bandwidth Video Surveillance

› Multipurpose Networks

› ITS Applications

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

NW10[E]

A

SPECIFICATIONS

Industrially Hardened High Performance

Wireless for High Density Environments

Software Features

Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support

802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters

Wireless Radio

EIRP NW10 (FCC): Up to +36 dBm for point to

multipoint deployments, +49 dBm for point to
point deployments with MAC-lock feature enabled

NW10E (ETSI): +30 dBm
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.

Not all frequencies are supported in all regions.

Contact ComNet for frequencies supported in your

region.
Bandwidths 5, 10, 20 and 40 MHz

Standard Internal Antenna

Antenna Internal 19 dBi Dual Polarized Directional
Gain 19 dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical

Connectors

Gigabit Ethernet Port 1 RJ-45, Sealed Cable Gland
10/100 Ethernet Port 2 RJ-45, Sealed Cable Gland

Power

Operating Voltage 42 to 57 VDC
Power Consumption 5 W Max
PD Power IEEE802.3af/at pass-through PD compliant
PSE Power IEEE802.3af PSE compliant uplink

Mechanical

Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)
Shipping Weight: < 4.4 lb / 2 kg

Environmental

MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹

Warranty

Internal Components Lifetime
Enclosure 3 Year

GENCY COMPLIANCE

ORDERING INFORMATION

Part Number Description

NW10 Industrially Hardened Narrow Bandwidth Wireless Radio, Support s distances up to 2 mi/3.2 km, FCC cer tified for North America

NW10E Industrially Hardened Narrow Bandwidth Wireless Radio, Support s distances up to 2 km/1.25 mi, E TSI certified for European Union

Included Accessories Pole Mounting Hardware Kit

Options NWBKT - Articulating Wall or Pole Mounting Kit. Suppor ts up to 3in/76mm diameter poles. (Sold Separately)

PIM1 - Hardened Power Injection Module suppor ting 24-48V DC and 24VAC Input, Includes 24V 12W power supply
CNGE1IPS - Hardened 35 W Midspan Power Injec tion Module for Passthrough PoE Applic ations supporting 90 -264V AC and 56V DC Input
Add suf fix /BB for Internal Batter y Backup supporting up to 15 minutes of operation depending unit configuration
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)

NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

ComNet Managed

Switch with 30W PoE

Connected to Network

1Gbps

NW10

(Access Point)

NW10

(Client)

P1

P2

PoE Camera

Legend

Wireless

Cat5

Power

Ethernet

CNGE1IPS or

any PSE device

P1

Port 1: 10/100/1000TX RJ-45
IEEE802.3af/at PD compliant

P2

Port 2: 10/100TX RJ-45
IEEE802.3af PSE compliant

Power

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

24 Apr 2017© 2017 Communica tion Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.