Comnet NW10DR, NW10DRE Specsheet

Shown with NWADA1 antenna

(sold separately)

Industrially Hardened High Throughput and Scalable Dual Radio

Wireless Bridge with Optional External Antenna

NW10DR

1 1IP67-40º TO 75ºC 802.3af/at802.3at

The NetWave® industrially hardened narrow bandwidth dual wireless radio is is used
for redundant ring and drop & repeat topologies when used with an external antenna.
Radio 1 is a 19dBi 17° internal antenna while radio 2 has dual N-Female connectors
for an external 5GHz antenna. The wide range of channel spectrum widths available
on the NW10DR series of radios gives you the option of using wide channel widths for
high throughput deployments that have little interference and noise while the narrow
channel widths will increase the number of available non overlapping channels and
improve stability in crowded RF environments but decrease maximum throughput. The
NW10DR is FCC certified for use in North America.

FEATURES

› Narrow Channel Spectrum Widths for large and noisy

deployments

› 5,10,20 and 40 Mhz Channel Bandwidth Support

› Up to 240 Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 miles

› IEEE802.3at PoE Compliant PD on port 1

› IEEE802.3af power source (PSE) available on port 2

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation and

setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› Radio Internal Components covered by Lifetime Warranty.

› Enclosure covered by Three Year Warranty.

APPLICATIONS

› Installations that require redundant ring or linear drop and

repeat topologies

› Large deployments where there is significant channel

overlapping causing interference

› Point to Multi-Point topologies whereby several Clients

connect to one Access Point

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other
industrial automation and control applications operating in
harsh or out-of-plant environments

› Electrical substation video and perimeter surveillance

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

NW10DR

A

SPECIFICATIONS

Industrially Hardened High Throughput and Scalable Dual Radio

Wireless Bridge with Optional External Antenna

Software Features

Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support

802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters

Wireless Radio

EIRP NW10DR (FCC): Up to +36 dBm for point to

multipoint deployments, +49 dBm for point to
point deployments with MAC-lock feature enabled

NW10DRE (ETSI): ETSI Unit Not Available
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.

Not all frequencies are supported in all regions.

Contact ComNet for frequencies supported in your

region.
Bandwidths 5, 10, 20 and 40 MHz

Standard Internal Antenna

Antenna Internal 19 dBi Dual Polarized Directional
Gain 19 dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical

Connectors

10/100 Ethernet Port 2 RJ-45, Sealed Cable Gland
Gigabit Ethernet Port 1 RJ-45, Sealed Cable Gland
External Antenna (Radio 2) 2 × N-Type 50 ohm

Power

Operating Voltage 42 to 57 VDC
Power Consumption 5 W Max
PD Power IEEE802.3af/at PD compliant
PSE Power IEEE802.3af PSE compliant

Mechanical

Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)
Shipping Weight: < 4.4 lb / 2 kg

Environmental

MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹

Warranty

Internal Components Lifetime
Enclosure 3 Year

GENCY COMPLIANCE

ORDERING INFORMATION

Part Number Description

NW10DR Industrially Hardened Dual Radio Narrow Bandwidth Wireless Bridge, Supports distances up to 2 mi/3.2 km, FCC certified for Nor th America

Included Accessories Pole Mounting Hardware Kit

Compatible External
Antennas

Options NWBKT - Articulating Wall or Pole Mounting Kit. Suppor ts up to 3in/76mm diameter poles. (Sold Separately)

NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

NW10

(Access Point)

ComNet Managed Switch with
30W PoE Connected to Network

NWAVBSA1 - Dual Polarization Variable Beamwidth Sec tor Antenna for NetWave Wireless Ethernet Devices (Sold Separately)
NWADA1 - Dual Polarization 4.9-5.8GHz 19dBi 17 degree Beamwidth Antenna for NetWave Wireless Ethernet Devices (Sold Separately)
NWAODA1 - External Omni Direc tional Dual Band Antenna for NetWave Wireless Ethernet Devices (Sold Separately)

PIM1 - Hardened Power Injection Module suppor ting 24-48V DC and 24VAC Input, Includes 24V 12W power supply
Add suf fix /BB for Internal Batter y Backup supporting up to 15 minutes of operation depending unit configuration
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions (Extra charge, consult fac tory)

NWADA1

Antenna (Client)

NW10DR

Internal Antenna

Access Point

NWADA1

Antenna (Client)

CNGE1IPS or

any PSE device

NW10DR

Internal Antenna

Access Point

CNGE1IPS or

any PSE device

NW10

(Access Point)

ComNet Managed Switch with

30W PoE Connected to Network

PoE Camera

PoE Camera

PoE Camera

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

24 Apr 2017© 2017 Communica tion Networ ks. All Right s Reserve d. “ComNet,” t he “ComNet Log o,” “NetWave” and t he “NetWave L ogo” are regis tered trad emarks of Commu nication Net works.