Comnet FDXT1-E1M1 Specsheet
T1/E1 Point-to-Point Transceiver
FDXT1/E1(M,S)1(A,B)
D
1
The ComNet
and B8ZS data signals over one single mode or multimode optical fiber. The
transceivers synchronize and regenerate data to eliminate jitter accumulated
through the link. Models within this series are available for use with multimode
or single mode optical fiber. Plug-and-play design ensures ease of installation
requiring no electrical or optical adjustments. Each transceiver incorporates a
bi-color (Red/Green) indicating LED for monitoring proper system operation.
The FDXT1/E1 standard size units may be either wall or rack-mounted in a
ComNet card cage, or may be installed in an IFS R3 rack with the selection of the
corresponding model (see ordering information next page).
™
FDXT1/E1 data transceivers are T1/E1 links that support AMI
FEATURES
› Robust design assures extremely high reliability in
unconditioned out-of-plant/roadside environments
› LED status indicators confirm operating status
› Designed for installation in harsh out-of-plant/
unconditioned industrial or roadside operating
environments (-40º to +70ºC ambient). Fully compliant with
the environmental requirements of NEMA TS-1/TS-2 for
Traffic Signal Control Equipment
› Remote Fault Indication allows the user to determine when
a fiber break or loss of prime operating power has occurred,
or a transceiver in the field has failed
› Voltage transient protection on all power and signal input/
output lines
› Wide optical dynamic range: optical attenuators are never
required
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› Fit and Functional Replacement for IFS D1200-R3 Series
› Single Fiber Design
› Lifetime Warranty
APPLICATIONS
› T1/DS-1 and E1 Telephony Networks
› ITS/Traffic Signal Control Equipment
› Building Automation and Environmental Control Systems
› Computer/Data Equipment
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FDXT1/E1(M,S)1(A,B)
SPECIFICATIONS
Data Electrical & Mechanical
Data Format: T1/E1 AMI or B8ZS DSL communications Power: R3: 24 VAC @ 2W
Data Rate: T1 - 1.544Mbps
E1 - 2.048Mbps
Operating Mode: Asynchronous, simplex or full-duplex Number of Rack Slots: 1 (Order model for ComNet or IFS racks)
Bit Error Rate: <10-12 @ Maximum Optical Loss Budget Current Protection: Automatic Resettable Solid-State Current Limiters
Wavelength
Number Of Fibers
Optical Emitter
LED Indicators
Connectors
1310nm, MM and SM Circuit Board:
1
Laser Diode
Power Indicator
Receive Data Active
Transmit Data Active
Test
Power:
Terminal Block
Optical:
ST (Standard, other connectors available by request)
Data:
R3: Terminal Block
ComFit: RJ-45 for T1(break out kit included) BNC for E1
Environmental
Size (L×W×H):
Shipping Weight:
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
T1/E1 Point-to-Point Transceiver
ComFit: 9VDC @ 2W
Rack Power: From Rack
Meets IPC Standard
R3: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
ComFit: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
<2 lbs./0.9 kg
>100,000 hours
-40˚ C to +75˚ C
-40˚ C to +85˚ C
0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding
suffix ‘/C’ to model number for conformal coating.
ORDERING INFORMATION
Fibers
Part Number Description
FDXT1/E1M1A Universal Point-to-Point “A” End, ComFit size 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDXT1/E1S1A Universal Point-to-Point “A” End, ComFit size 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
FDXT1/E1M1B Universal Point-to-Point “B” End, ComFit size 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDXT1/E1S1B Universal Point-to-Point “B” End, ComFit size 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
Included Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC. 5060 Hz (Included with ComFit version only)
Add ‘/R3’ for IFS D1200 Series-Compatible Unit
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
Required Fiber
Optical
Pwr Budget Max Distance
TYPICAL APPLICATION
D D
FDXE1/T1
A unit
FDXE1/T1
B unit
OPTICAL FIBER
TWISTED PAIR
# Rack
Slots
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2013 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Co mmunication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
06 Mar 2013
Loading...