Comnet FDX70EAM1 Specsheet
Universal RS232/422/485 Data Point-to-Point Transceiver
FDX70E(A,B)(M,S)1
HARDENEDINCLUDED
The ComNet™ FDX70 data transceivers provide point-to-point transmission of
simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one single
mode or multimode optical fiber. The transceivers are transparent to data encoding
allowing for broad-range compatibility. Models within this series are available for use
with multimode or single mode optical fiber. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments.
1
FEATURES
› Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire)
specifications
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
› Robust design assures extremely high reliability in
unconditioned out-of-plant/roadside environments
› NTCIP compatible
› Remote Fault Indication allows the user to determine when a
fiber break or loss of prime operating power has occurred, or
a transceiver in the field has failed
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and other
voltage transient events.
› Wide optical dynamic range: optical attenuators are never
required
› Bi-color (Red/Green) LED status indicators provide rapid
indication of critical operating parameters
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› May be DIN-rail mounted with the ComNet model DINBKT1
or DINBKT4 adaptors (sold separately)
› Lifetime Warranty
APPLICATIONS
› Access Control Systems
› Building Automation and Environmental Control Systems
› Computer/Data Equipment
› Fire and Alarm Systems
› Traffic Signal Control Equipment
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FDX70E(A,B)(M,S)1
SPECIFICATIONS
Universal RS232/422/485 Data Point-to-Point Transceiver
Data
Data Format RS232, RS422, 2 or 4-wire RS485 w/Tri-State,
Manchester, bi-phase, Sensornet
Data Rate DC-1Mbaud (RS422 & RS485) DC-250kbps (RS232)
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <10-12 @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, MM and SM
Number of Fibers 1
Optical Emitter Laser Diode
LED Indicators 1. Power 2. Status 3. Data Out
4. Data In 5. Fiber Link Status
Failure Relay Normally closed contact: Solid-State relay
contacts rated at 0.5 mA, resistive load.
Electrical & Mechanical
Power Terminal Block
Optical ST
Data Terminal Block
Relay Terminal Block
ORDERING INFORMATION
Power
Operating Voltage Range 8 to 15 VDC
Power Consumption 4 W
Rack Power From Rack
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
Part Number Description
Fibers
Required Fiber
Optical
Pwr Budget Max Distance²
# Rack
Slots
FDX70EAM1 Universal Data Point To Point “A” End, 1 Fiber, MM 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDX70EAS1 Universal Data Point To Point “A” End, 1 Fiber, SM 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
FDX70EBM1 Universal Data Point To Point “B” End, 1 Fiber, MM 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDX70EBS1 Universal Data Point To Point “B” End, 1 Fiber, SM 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC. 5060 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
[2] Transmission distance will be diminished if additional losses are introduced by the optical connectors, splices and other factors regarding the quality
of the fiber. Operating distance of multimode is limited by the characteristics of the fiber bandwidth. For additional information or suppor t, contact
the ComNet Applications Engineering Department.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve
and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
D D
FDX70EAS1
1 Fiber
9/125µm SM
Up to 69 km
(43 miles)
FDX70EBS1
OPTICAL FIBER
TWISTED PAIR
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
25 Jun 2014© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
Loading...