RS232/RS422/RS485 Data Transceiver
FDX60(M,S)[-M]
HARDENEDINCLUDED
The ComNet™ FDX60 series data transceivers provide point-to-point transmission
of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one or
two optical fibers. The transceivers are transparent to data encoding allowing
for broad-range compatibility. Models within this series are available for use
with multimode or single mode optical fiber. Plug-and-play design ensures ease
of installation requiring no electrical or optical adjustments. Each transceiver
incorporates a bi-color (Red/Green) indicating LED for monitoring proper system
operation. The FDX60 has a built-in fiber link test feature that allows for the testing
of the fiber.
1
FEATURES
› Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire)
specifications
› Tested and certified by an independent laboratory for full
compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity
with condensation, high-line/low-line voltage conditions and
transient voltage protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
› Robust design assures extremely high reliability in
unconditioned out-of-plant/roadside environments
› NTCIP compatible
› Fiberlink Fiber Link Tester
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and other
voltage transient events.
› Wide optical dynamic range: optical attenuators are never
required
› Indicating LEDs display equipment operating status
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› Standard size FDX60 may be DIN-rail mounted by the
addition of ComNet model DINBKT1 or DINBKT4 adaptor
plate.
› FDX60-M has a small footprint and is designed for surface
mounting
› Lifetime Warranty
APPLICATIONS
› Access Control Systems
› Building Automation and Environmental Control Systems
› Computer/Data Equipment
› Fire and Alarm Systems
› Traffic Signal Control Equipment
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FDX60(M,S)[-M]
SPECIFICATIONS
RS232/RS422/RS485 Data Transceiver
Data
Data Format RS232, RS422, 2 or 4-wire RS485
w/Tri-State, Manchester, bi-phase, Sensornet
Data Rate DC-250 kbps
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <10-9 @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm
Fibers 1 In/1 Out
Optical Emitter Laser
LED Indicators › Power › Data In › Data Out › Link
› Loop Back
Connectors
Power Terminal Block
Optical ST
Data Terminal Block
Relay Terminal Block
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 2 W
Electrical & Mechanical
Number of Rack Slots 1 (ComFit)
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size, Mini 4.1 × 3.7 × 1.1 in (10.4 × 9.4 × 2.8 cm)
Size, ComFit 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
ORDERING INFORMATION
Fibers
Part Number Description
FDX60M1(A)Z(B)-M RS232, RS422, RS485(2W & 4W), Mini 1 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) NA
FDX60M1(A)(B) RS232, RS422, RS485(2W & 4W) 1 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) 1
FDX60S1(A)(B)-M RS232, RS422, RS485(2W & 4W), Mini 1 Single Mode 9/125µm 23 dB 69 km (43 miles) NA
FDX60S1(A)(B) RS232, RS422, RS485(2W & 4W) 1 Single Mode 9/125µm 23 dB 69 km (43 miles) 1
FDX60M2-M RS232, RS422, RS485(2W & 4W), Mini 2 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) NA
FDX60M2 RS232, RS422, RS485(2W & 4W) 2 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) 1
FDX60S2-M RS232, RS422, RS485(2W & 4W), Mini 2 Single Mode 9/125µm 23 dB 69 km (43 miles) NA
FDX60S2 RS232, RS422, RS485(2W & 4W) 2 Single Mode 9/125µm 23 dB 69 km (43 miles) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factor y)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
Req’d Fiber
Optical Pwr
Budget
Maximum
Distance # Rack Slots
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
D D
FDX60S1A
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
FDX60S1B
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
|
USA
T: 203.796.5300
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
OPTICAL FIBER
RS232 or RS422
NOTE: Unit can be used for transmission of
RS232 or RS422, but not simultaneously.
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO@COMNET.NET
|
INFO-EUROPE@COMNET.NET
22 Dec 2014© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
Loading...