Comnet FDX55S2E, FDX55S2, FDX55S1BE, FDX55S1AE, FDX55S1 Specsheet

Anti-Streaming RS-232/422 Drop-and-Repeat Data Transceiver

FDX55 SERIES

The ComNet™ FDX55 series consists of fully-digital transceiver units designed for
implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond
traffic signalization/communications data networks utilizing one or two optical fibers.
These environmentally-hardened units are ideal for use in unconditioned out-of­plant or roadside installations and the master-configured transceiver unit may be
located anywhere within the network, making this equipment ideal for applications
involving on-street master controllers with upstream and downstream communication
requirements. These units are compatible with the FDX50, FDX51 and FDX52 Series of
optical modems, and ComNet model FDX55BE may be used as a cost-effective solution
for use as a line-terminating transceiver. Manually resettable anti-streaming is included
for unparalleled network protection. Optional battery backup capability provides the
highest level of network reliability in the event of a loss of local prime operating power,
and maintains continuous communications channel operation. Plug-and-play design
ensures ease of installation and no electrical or optical adjustments are ever required.

FEATURES

› Meets EIA RS232C/D specifications (Simplex or Duplex)

› NTCIP compatible

› Tested and certified by an independent laboratory for

full compliance with the environmental requirements
(ambient operating temperature, mechanical shock, vibration,
humidity with condensation, high-line/low-line voltage
conditions and transient voltage protection) of NEMA TS-1/
TS-2 and the Caltrans Specification for Traffic Signal Control
Equipment.

› Robust design assures extremely high reliability in

unconditioned roadside environments

› User-selectable DTE or DCE interface ensures ease of

installation and maximum versatility

› Supports Request to Send (RTS) and Clear to Send (CTS)

signals

› RJ-11 expansion port provides network branching capability

by electrically linking co-located transceiver units

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other
voltage transient events.

› Optional internal battery backup provides 12 hours operating

time in the event of loss of 115 VAC prime operating power,
and maintains continuous channel communications.

HARDENEDINCLUDED

› Wide optical dynamic range: optical attenuators are never

required

› User-configurable optical and electrical Anti-Streaming

provides network protection against faulty streaming
controller operation

› Indicating LEDs display equipment operating status

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› May be DIN-rail mounted by the addition of ComNet model

DINBKT1 or DINBKT4 adaptor plate.

› Lifetime Warranty

1

APPLICATIONS

› Access Control Systems

› Building Automation & Environmental

Control Systems

› Computer/Data Equipment

› Fire and Alarm Systems

› Traffic Signal Control Equipment

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FDX55 SERIES

Anti-Streaming RS-232/422 Drop-and-Repeat Data Transceiver

SPECIFICATIONS

Data

Data Format RS-232, RS-422
Data Rate DC-115 kbps
Operating Mode Asynchronous, simplex or full duplex
Bit Error Rate <1 in 10-9 @ Max. Optical Loss Budget
Anti-Streaming Time-out 4, 8, 16, 64 Seconds or Infinity (disabled)

Wavelength

FDX55M2, FDX55M2E 1310 nm, Multimode
FDX55M28 850 nm, Multimode
FDX55S1, FDX55S1(A,B)E 1310/1550 nm, Single Mode
FDX55S2, FDX55S2E 310/1550 nm, Single Mode

Fibers

FDX55M28, FDX55M2, FDX55S2 2 In/2 Out
FDX55M2E 2
FDX55S1 1 In/1 Out
FDX55S1(A,B)E 1

Optical Emitter Laser
LED Indicators › Transmit Data › Receive Data

› Clear to Send (CTS) › Request to Send (RTS)
› Fault/Anti-Streaming Activated

Connectors

Optical ST standard (SC, FC as options only)
Power Terminal Block
Data Type DB-25S
Expansion Port RJ-11

Power

Operating Voltage Range 9 to 30 VDC (or from C1 Rack, consult fac tory)
Power Consumption 2.5 W

Battery Backup Option
Internal, rechargeable Nickel Metal Hydride (NIMH) battery.

Operating Period: 12 hours typical

Electrical & Mechanical

Power
Surface Mount 9-30 VDC @ 2.5 W
Rack From Rack
Number of Rack Slots 2
Current Protection Automatic Resettable Solid-State Current
Limiters
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in (15.5 × 13.2 × 5.6 cm)
Shipping Weight <2 lbs./0.9 kg

Environmental

MTBF: >100,000 hours
Operating Temp: -40˚ to +75˚ C
Storage Temp: -40˚ to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*

ORDERING INFORMATION

Part # Description Fibers Req’d Fiber

FDX55S1 232/422 Drop and Repeat Transceiver (1310/1550 nm) 1 In/1 Out Single Mode 9/125µm 23 dB 69 km (43 miles)

FDX55M2 232/422 Drop and Repeat Transceiver (1310 nm) 2 In/2 Out Multimode² 62.5/125µm 14 dB 4 km (2.5 miles)

FDX55M28 232/422 Drop and Repeat Transceiver (850 nm) 2 In/2 Out Multimode² 62.5/125µm 14 dB 3 km (1.8 miles)

FDX55S2 232/422 Drop and Repeat Transceiver (1310/1550 nm) 2 In/2 Out Single Mode 9/125µm 23 dB 69 km (43 miles)

FDX55S1AE 232/422 Line-Terminating Transceiver (1310/1550 nm) 1 Single Mode 9/125µm 23 dB 69 km (43 miles)

FDX55S1BE 232/422 Line-Terminating Transceiver (1310/1550 nm) 1 Single Mode 9/125µm 23 dB 69 km (43 miles)

FDX55M2E Line-Terminating Transceiver (850 nm) 1 Multimode² 62.5/125µm 14 dB 4 km (2.5 miles)

FDX55S2E 232/422 Line-Terminating Transceiver (1310/1550 nm) 1 Single Mode 9/125µm 23 dB 69 km (43 miles)

Accessories
Options

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
[2] For 50/125µm fiber, subtract 4 dB from the optical power budget.

DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘-B’ for NIMH batter y backup
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Add ‘/SC’ for SC connectors or ‘/FC’ for FC connectors
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBK T4)

Optical Pwr
Budget

Maximum
Distance

TYPICAL APPLICATION

D

FDX55S1AE

FDX55S1 FDX55S1BE

OPTICAL FIBER
RS-232 or RS-422

NOTE: Unit can be used for transmission of
RS-232 or RS-422, but not simultaneously.

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

D D

|

|

USA

T: 203.796.5300

|

MORLEY

|

LEEDS, UK LS27 7LE

|

|

F: 203.796.5303

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

21 Nov 2014© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.