Comnet FDW1000S-R, FDW1000S-C, FDW1000M-R, FDW1000M-C Specsheet
Optical Wiegand, MagStripe
& F/2F Data Extender
FDW1000(M,S) Series
HARDENEDINCLUDED
The ComNet™ FDW1000 data extenders provide optical connectivity between
one card reader and its associated door or gate locking hardware, to any Wiegand,
MagStripe, or F/2F-based control panel. The connection is completely supervised
and secure, and a pair of these units will support a single locking gate or door and its
associated reader using two multimode or singlemode optical fibers. When used with
the ComNet EXP-100 Expansion Module, up to seven gates or doors and readers may
be integrated onto the same network. A service mode provides easy and fast set-up
and configuration when the EXP-100 is used, and user selection of the reader formats
via DIP-switch setting is included. An auxiliary I/O (input/output) interface is available
for determining door, gate, and control panel status and signaling, and a relay interface
provides the door strike or gate activation functions. These extenders are designed for
long-term, reliable operation in harsh industrial environments, and a fault-specific LED
indicator is provided for rapidly ascertaining the operating status of the extender and
the link. Packaged in a rugged aluminum housing, the FDW1000 is designed for shelf
or surface mounting. The FDW1000 series are supplied as a remote unit for door or
gate locations, and a central unit for control panel installation.
FEATURES
› Wiegand, MagStripe, or F/2F-based reader formats/control
panel-compatible.
› Completely supervised and secure operation
› Service mode provides simple and fast system set-up and
configuration
› DIP-switch selection of the desired reader format
› Auxiliary I/O (input/output) interface is available for
ascertaining door, gate, and control panel status and
signaling.
› Relay interface provides door strike or gate activation
functions.
› LED fault-specific status indicator for rapidly determining the
operating status of the extender and the link.
› Voltage transient/surge protected.
› Small size: Ideal for use in those installations where space is
at a premium.
› Plug-and-play design ensures ease of operation, and no
optical adjustments are ever required.
› Lifetime warranty
› Made in the USA
APPLICATIONS
› Optical extension of any Wiegand, MagStripe, or
F/2F-based control panel and door or gate
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FDW1000(M,S) Series
SPECIFICATIONS
Optical Wiegand, MagStripe
& F/2F Data Extender
Data
Interface Wiegand, Strobed (Clock and Data), and F/2F
LED: 0 – 30 VDC
Relays
Maximum Switching
Voltage & Current 220 VDC 30W, 1A, resistive load only
250 VAC, 37.5VA, 1A
Running Specification
with Load 30 VDC, 1A, resistive load only.
Contact lifetime: 1×10e5 operations at 20º C
operating temperature.
125 VAC, 0.3A, resistive load only.
Contact lifetime: 1×10e5 operations at 20º C
operating temperature.
Fibers
Multimode Loss Budget 13 dB 850nm 62.5/125µm
Loss Budget 9 dB 850nm 50/125µm
Single mode: Loss Budget 20 dB 1300nm 9/125µm
Fibers 2
Optical Emitter Laser
LED Status Indicator Fault-specific diagnostic LED for operating power
and communications link status
Connectors
Optical ST
Data Removable Screw Terminal Blocks
Power Removable Screw Terminal Blocks
Relay Removable Screw Terminal Blocks
Power
Input 8 to 16 VDC @ 200 mA Max
Output +5 VDC @ 100 mA
Electrical & Mechanical
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 4.5 × 3.1 × 2.0 in (11.4 × 7.8 × 5 cm)
Shipping Weight <2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
ORDERING INFORMATION
Fibers
Part Number Description
FDW1000M/C Optical Wiegand Extender, Central Unit
FDW1000M/R Optical Wiegand Extender, Remote Unit
FDW1000S/C Optical Wiegand Extender, Central Unit
FDW1000S/R Optical Wiegand Extender, Remote Unit
Accessories
Options
[2] Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. For 50/125 Fiber subtract 4 dB from Optical Power Budget.
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Required Fiber
2 Multimode‡ – 62.5/125µm 13 dB 3.5 km (2 miles)
2 Single Mode‡ – 9/125µm 20 dB 40 km (24 miles)
Optical PWR
Budget
Maximum
Distance ²
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
20 Nov 2014© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
Loading...