Comnet CWGE2FE8MSPOE+ Specsheet

Commercial Grade Managed Ethernet Switch: (8) 10/100TX Power Over

Ethernet (PoE+) Ports + (2) 10/100/1000TX or 1000FX SFP Ports

CWGE2FE8MSPOE+

8FLEXIBILIT YINCLUDED 2IEEE802.3at

The ComNet CWGE2FE8MSPOE+ commercial grade managed Ethernet switch provides eight ports of 10/100 BASE-TX PoE+ and two ports of 10/100/1000TX or 1000FX transmission. These units are available for use with either conventional CAT-5e copper or optical transmission media. The eight electrical ports suppor t the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. All eight ports support IEEE.802.3at based PoE+. Two ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP modules. These network managed layer 2 switches are optically (1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices.

FEATURES

› Commercial Grade

› Ambient operating temperature range: 0˚ C to +50˚ C

› 10/100 BASE-TX compatible PoE+ ports

› Flexible optics configuration via SFP plug-in modules

› Fully configurable through SNMP or web-based network

management

› IGMP Snooping V1/V2 for multicast filtering

› Port based VLAN (IEEE 802.1Q)

› Rapid Spanning Tree protocol (IEEE 802.1W)

› Port Based Security

› Power Supply Included

› LED status indicators confirm operating status

› The switch can be mounted within any standard 19-inch

equipment rack using the included Rack Mount Bracket Adaptor Kit

› Five Year Warranty

APPLICATIONS

› Industrial and Factory Automation

› Integrated IP-Video and Data Transmission Networks

› Industrial Security Access Control Systems

* Small Form-Factor Pluggable Module. Sold separately.

5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CWGE2FE8MSPOE+

SPECIFICATIONS

Commercial Grade Managed Ethernet Switch: (8) 10/100TX

Power Over Ethernet (PoE+) Ports + (2) 10/100/1000TX or 1000FX SFP Ports

Software

Configuration SNMP v1/v2c, Web VLAN IEEE 802.1Q (32 Max), Port based VLAN (26 Max) Redundancy IEEE802.1d STP, IEEE802.1w RSTP, and Loopback

detection

Security MAC address binding port security, DHCP Relay,

TCP/UDP filters

Traffic Control IGMP Snooping V1/V2 for multicast group

management, Bandwidth Control, Broadcast Storm Control, Port trunk, QoS priority queuing / CoS, LACP port trunk, IEEE 802.3x flow control

Diagnostics Port Mirroring, Real-time traffic statistic, MAC

Address Table

PoE Management PoE Enable/Disable, Power limit by classification,

Power limit by management, Power feeding priority, Power On Delay Timer, Power Scheduling

Switch Properties

Switch Architecture Back-plane: 5.6 Gbps Packet Buffer 2.75 Mb MAC Address 4K

Connectors

10/100TX 8 × RJ-45 Gigabit Combo 2 × 10/100/1000TX RJ45

2 × 1000FX SFP¹

Power

Power consumption 260 W (with full PoE Load)

20 W (with no PoE) Operating Power 110/240 VAC with internal power supply unit. Max Power Per PoE Port 30 W max Total PoE Power Budget 240 W max

PoE pin assignment

RJ45 port #1 - #8 support IEEE802.3at End-point, Alternative A mode. Positive (VCC+): RJ45 pin 1, 2 Negative (VCC-): RJ45 pin 3, 6

Mechanical

Indicating LEDs System: Power, PoE, System

Per port: Link/Activity, Speed

Gigabit Combo port: Link/Activity Dimensions (L × W × H) 13.0 × 9.1 × 1.7 in (33.0 × 23.0 × 4.3 cm) Cooling Fan Assisted Cooling

Environment

MTBF >100,000 hours Operating Temperature 0º to +50ºC Storage Temperature -40º to +70ºC Relative Humidity 0 to 95% (non-condensing)

Ethernet Standards

IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit fiber IEEE 802.3ab 1000Base-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1d Spanning Tree IEEE 802.1q VLAN Tag IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.3at Power over Ethernet

Regulatory Compliance

EMC CE, FCC Class A, EN55022, EN60950-1

ORDERING INFORMATION

Part Number Description

CWGE2FE8MSPOE+ Commercial Grade Managed Ether net Switch with (8) 10/100TX PoE+ + (2) 10/100/1000T X RJ45 or 1000F X SFP Ports

Options User selection of ComNet SFP (Extra charge, see SFP Modules data sheet for product numbers and compatibilit y before ordering)

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

TECH SUPPORT: 1.888.678.9427

F: +44 (0)113 253 7462

INFO-EUROPE@COMNET.NET

INFO@COMNET.NET

30 Nov 2015