Comnet CWFE8MS-DIN Specsheet

Industrial Grade Managed Ethernet Switch with (8) 10/100TX ports

CWFE8MS/DIN

8INCLUDED

The ComNet™ CWFE8MS/DIN Managed Ethernet Switch provides transmission of 10/100
BASE-T Ethernet data. These units are available for use with conventional CAT-5e copper
transmission media. Up to 8 electrical ports for easily implementing point-to-point, linear
add-drop, drop-and-repeat, star or true self-healing ring and mesh network system
architectures. The electrical ports support the 10/100 Mbps (10/100 BASE-TX) Ethernet
IEEE 802.3 protocol, and auto-negotiating and auto- MDI/MDIX features are provided for
simplicity and ease of installation. Plug-and-play design ensures ease of installation, and
no electrical adjustments are ever required.

FEATURES

› Industrial Grade

› Ambient operating temperature range: -10˚ C to +70˚ C

› 10/100 BASE-T compatible

› DIN Rail or Wall Mounted

› Relay Alarm

› Fully configurable through web-based or SNMP network

management

› IGMP Snooping V1 for multicast filtering and IGMP Query V1/V2

› Port based VLAN (IEEE 802.1Q)

› Rapid Spanning Tree protocol (IEEE 802.1W)

› Indicating LEDs provide rapid indication of critical operating

parameters

› Five Year Warranty

APPLICATIONS

› Industrial and Factory Automation

› Integrated IP-Video and Data Transmission Networks

› Industrial Security Access Control Systems

5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CWFE8MS/DIN

SPECIFICATIONS

Industrial Grade Managed Ethernet Switch with (8) 10/100TX ports

Benefits

System Interface/Performance

RJ-45 port support Auto MDI/MDI-X Function

Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 1.6Gbps
1Mbits Packet Buffer
2K MAC Address Table

Case/Installation IP-30 Protection
DIN Rail and Wall Mount Design
Power Supply
Wide-range Redundant Power Design
Power Polarity Reverse Protect

Spanning Tree Support IEEE802.1d Spanning Tree
Support IEEE802.1w Rapid Spanning Tree
VLAN
Port Based VLAN
Support 802.1 Q Tag VLAN

X-Ring X-Ring, Dual Homing, and Couple Ring Topology

Provide redundant backup feature and recovery
time <300ms
QoS (Quality of Service)
Support IEEE 802.1p Class of Service,
Per port provides 4 priority queues
Port Base, Tag Base and Type of Service Priority

Bandwidth Control Ingress Packet Filter and Egress Rate Limit

Broadcast/Multicast Packet Filter Control
Port Mirror: Monitor traffic in switched networks
TX Packet only
Both TX and RX Packet

System Event Log System Log Server/Client
SMTP e-mail Alert
Relay Alarm Output System Events
IP Security: IP address security management to

prevent unauthorized intruder

SNMP Trap Support IEEE 802.1p Class of Service,
Per port provides 4 priority queues
Port Base, Tag Base and Type of Service Priority

Support IEEE 802.1ab LLDP Device cold start

Power status
Authentication failure
X-Ring topology changed
Port Link up/Link down

IGMP with Query mode for Multi Media Application

Hardware Specifications

TFTP Firmware Update and System Configure Restore and Backup

IEEE Standard IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid
Spanning Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag

Switch Architecture Back-plane (Switching Fabric): 1.6Gbps

Packet throughput
ability (Full-Duplex) 2.38Mpps @64bytes

Transfer Rate 14,880pps for Ethernet port

148,800pps for Fast Ethernet port

Memory Buffer 1Mbits

Mac Address 2K MAC address table

Flash ROM 512Kbytes

DRAM 8Mbytes

Connector 10/100TX: 8 x RJ-45 with auto MDI/

MDI-X function

Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable

EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)

Protocol CSMA/CD

LED Per port: Link/Activity (Green), Full duplex/

Collision (Yellow)
Per unit: Power (Green), Power 1 (Green), Power 2
(Green), Fault (Yellow), Master (Green)

Power Supply 12 to 48VDC

Redundant power with polarity reverse protec t
function and connective removable terminal
block for master and slave power

Power Consumption 6W

Operating Humidity 5% to 95% (Non-condensing)

Operating Temperature -10º to 70ºC

Storage Temperature -40º to 85ºC

Enclosure IP-30 Case protection

Dimension (W × D × H) 2.13 × 4.13 × 5.31 in (5.4 × 10.5 × 13.5cm)

Installation DIN rail (35 mm Track) or wall mount (Mounting

Kit Included)

EMI FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-

4-3 (RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5
(Surge), CE EN61000-4-6 (CS), CE EN61000­4-8, CE EN61000-4-11, CE EN61000-4-12, CE
EN61000-6-2, CE EN61000-6-4

Safet y UL, cUL, CE/EN60950-1

Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),

IEC60068-2-6 (Vibration)

5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427