Comnet CWFE1005POEMHO-M, CWFE1005POESHO-M, CWFE1003POESHO-M, CWFE1003POEMHO-M Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

CWFE100(X)POE(M,S)-M

10/100 MBPS ETHERNET
2 PORT MEDIA CONVERTER
ELECTRICAL

SC/ST OPTICAL

1

WITH POWER OVER ETHERNET

The ComNet™ CWFE1003POEM and CWFE1005POEM 2-port media converters provide
full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data
(10/100 BASE-TX) through multimode or single mode optical fiber. Type SC or type
ST optical connectors are available, providing the user with the flexibility to use these
devices with virtually any multimode or single mode cable plant.

Both mode A and mode B of PoE operation are supported and selected by the media
converter automatically. The Ethernet electrical interface auto-negotiates to either
10 or 100 Mbps without the need for any user selection, and the optical interface
operates at 100 Mbps (100-FX).

LED indicators are provided for rapidly ascertaining the operating status of the
device. See Figure 9 on Page 6 for an explanation of the LED Indicators.

These units are designed for shelf or stand-alone mounting. See Figure A on
Page 7 for mounting instructions.

See Figures 1 – 11 for complete installation instructions.

INS_CWFE100(X)POE(M,S)-M_REV–

10/28/10

PAGE 1

INSTALLATION AND OPERATION MANUAL CWFE100(X)POE(M,S)-M

FIGURE 1 – CWFE1003POE(M,S)-M MEDIA CONVERTER

CAT5e/6

FIGURE 2 – CWFE1003POE(M,S)-M MEDIA CONVERTER

REAR PANELFRONT PANEL

MULTIMODE OR
SINGLE MODE
OPTICAL FIBER

BLACK

BLACK WITH WHITE STRIPE

TECH SUPPORT: 1.888.678.9427

INS_CWFE100(X)POE(M,S)-M_REV–

10/28/10

PAGE 2

INSTALLATION AND OPERATION MANUAL CWFE100(X)POE(M,S)-M

FIGURE 2 – CWFE1003POE(M,S)HO-M MEDIA CONVERTER

CAT5e/6

FIGURE 3 – CWFE1003POE(M,S)HO-M MEDIA CONVERTER

REAR PANELFRONT PANEL

MULTIMODE OR
SINGLE MODE
OPTICAL FIBER

BLACK

BLACK WITH WHITE STRIPE

TECH SUPPORT: 1.888.678.9427

INS_CWFE100(X)POE(M,S)-M_REV–

10/28/10

PAGE 3