Comnet CWCHASSIS-US Specsheet

Commercial Grade Media Converter Rack Mount Chassis

AGENCY COMPLIANCE

With Single or Dual Power Supplies

CWCHASSIS

The CWCHASSIS is supplied with a single power supply but can also be fitted with a
second power supply (sold separately) that provides redundancy in the unlikely event
of a power supply failure. LED indicators provide visual indication in the event that
one of the two power supply modules has failed. The design approach employed by
ComNet for equipment mounted within the CWCHASSIS chassis rack unit with two
modular CWCHASSISPSU power supplies, provides for the elimination of a single­point failure in the event of a major fault within any module located within the chassis
rack. This is accomplished through the use of automatic electronic current limiting
within each rack-mountable module, rather than providing the current limiting within
the power supply unit which supports the power requirements for equipment located
within the rack. This automatic current limiting feature is also self-resetting, should the
fault or overload be of a temporary or intermittent condition. Furthermore, all modules
located within the chassis rack are hot-swappable, so that it is not necessary to power­down the rack when removing or replacing modules.

FEATURES

› Available with one or two power supply modules in a fault-

tolerant / redundant configuration
› Automatic electronic current limiting feature
› LED notification in the event of power supply failure
› 10 rack slots available
› All modules and power supplies located within the chassis rack

are hot-swappable
› Compatible with CWFE2SC(M,S)2 and CWGE2SFP series

products
› 5 Year Warranty

ORDERING INFORMATION

Part Number Description

CWCHASSIS/US 19” Rack With Single PSU (US Power Cord)

CWCHASSIS/EU 19” Rack With Single PSU (EU Power Cord)

CWCHASSIS/UK 19” Rack With Single PSU (UK Power Cord)

CWCHASSIS/AU 19” Rack With Single PSU (Australian Power Cord)

CWCHASSIS/SA 19" Rack With Single PSU (South African Power Cord)

CWCHASSISPSU Spare/Redundant Power Supply For CWCHASSIS

Included Accessories 100-240 VAC Input (includes 1 power supply and 1 power cord),

rack mount bracket kit.

SPECIFICATIONS

Electrical

Input Voltage 100-240 VAC @ 1A Maximum 50/60Hz
Output Voltage 5 VDC +/- 5% @ 18A

Fusing 6.3 A slow blow (rack power supply)

Plug-in modules individually electronically fused.

Power Indicator Power A / B Good

Power A / B Fail

AC Line Cord Detachable, IEC-connected. Allows easy field

replacement or exchange for various worldwide AC
power plug configurations.

Mechanical

Size (L × W × H) 10.5 × 17.3 × 5.2 in (26.6 × 44 × 13.3 cm)
Rack Slots 10 slots available
Installation Rack Mount
Shipping Weight 11 lb / 5 kg
Cooling Fan Assisted Cooling, Noise Level 46dB(A)

Environmental

MTBF >50,000 hours
Operating Temp -0 º to +50 ˚C
Storage Temp -40 ˚ to +70 ˚C
Relative Humidity 10% to 90% (non-condensing)
Heat Generation 300 BTU (Maximum under full load)

*

*Power Supply Only

In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]