Comnet CNFE1004BPOEMHO-M Specsheet
10/100 Mbps Ethernet 2 Port Media Converter
Electrical to ST/SC/SFP* Optical with PoE+
CNFE100(X)POE/M Series
FLEXIBILIT YHARDENED 60W PoE++INCLUDED CONVERTER
The ComNet™ CNFE100(X)POE/M Series 2-port media converters provide fullduplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data
(10/100 BASE-TX) through multimode or single mode optical fiber. They provide
full compliance with IEEE 802.3at as Power Sourcing Equipment (PSE), with a
maximum power of 30 watts in Mode A or Mode B, making them ideal for those
applications where the remote equipment draws significant power. A higher
output 60 watt model is available. Mode A and mode B are selected by the media
converter automatically. Plug-and-play design ensures ease of operation, and no
optical adjustments are ever required.
FEATURES
› Exceeds the requirements of the latest PoE+ standard (IEEE
802.3at)
› The Ethernet electrical interface auto-negotiates to either 10
or 100 Mbps without the need for any user selection
› The optical interface operates at 100 Mbps (100-FX)
› Power Sourcing Equipment (PSE): Provides 30 watts in two
modes at 48 VDC, for high output demand applications of
remote Ethernet equipment
› 60 watt higher output version available
› SC, ST or SFP optical connectors available
› Automatic resettable solid state current limiters for modem
protection
› A power supply providing 48 VDC at 1.25A is provided with
each converter
› Indicating LEDs provided for rapidly ascertaining the
operating status of the device
› Lifetime Warranty
APPLICATIONS
› PoE+ operation of IP Cameras, with pan-tilt-zoom capability
› PoE+ operation of IP cameras with heated/cooled housings
› PoE+ operation of remote telemetry and sensing devices for
industrial/SCADA networks
› PoE+ operation of transportation-specific/ITS field equipment
› PoE+ operation of any 10/100 Mbps Ethernet-compatible
field device where high power consumption is required
* Small Form-Factor Pluggable Module. Sold separately.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CNFE100(X)POE/M Series
SPECIFICATIONS
10/100 Mbps Ethernet 2 Port Media Converter
Electrical to ST/SC/SFP Optical with PoE+
Data
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full
Duplex Optical Port
Fibers ST, SC or SFP Dependent (Requires selection of
sold-separately SFP modules. See ComNet data
sheet for number and description of SFP module
options.)
Connectors
Optical ST, SC or SFP
Power Terminal Block
Electrical RJ45
PoE Pin Assignment RJ45 port support s IEEE802.3at
End-point Positive (VCC+): RJ45 pin 1, 2 or 4, 5
Negative (VCC-): RJ45 pin 3, 6 or 7,8 Data (1, 2,
3, 6)
Max. PoE Current 600mA continuous
LED Indicators - Optical Link/Data Activity
- Power
- PoE
Power
Operating Voltage 48VDC
Power Consumption 1.25A
Electrical & Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 4.0 × 3.7 × 1.0 i,. (10.4 × 9.5 × 2.7 cm)
Shipping Weight <1 lb./0.5 kg
Environmental
MTBF >100,000 hours
Operating Temp -4 0˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
[1] May be extended to condensation conditions
1
TYPICAL APPLICATION
E E + POE
1 Fiber, ST
Multimode
2 km (1.2 mi)
E
E
CNFE2MC
+ SFP-3
2 Fiber
Single Mode
Distance 20km (12.4 mi)
(Fiber Count, Type and Distance
are dependent on SFP selection)
CNFE1003S2
2 Fiber, SC
Single Mode
60 km (37.3 mi)
CNFE1002BPOEM/MCNFE1002M1A
48V Power Supply
CNFESFPMCPOE60/M
+ SFP-3
48V Power Supply
CNFE1003POES/M
48V Power Supply
E + POE
E + POE
OPTICAL FIBER
COPPER CABLE
+
+
+
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Loading...