Comnet CNFE1003POEMHO/M, CNFE1003POES/M, CNFE1005POES/M, CNFE1005POESHO/M, CNFE1004APOEM/M Installation And Operation Manual
...
INSTALLATION AND OPERATION MANUAL
CNFE100(X) PoE Series
10/100 MBPS ETHERNET FIBER OPTIC
MEDIA CONVERTER WITH 30W OR 60W POE+
This manual serves the following
ComNet Model Numbers:
CNFE1003POEM/M
CNFE1003POEMHO/M
CNFE1003POES/M
CNFE1003POESHO/M
CNFE1005POEM/M
CNFE1005POEMHO/M
CNFE1005POES/M
CNFE1005POESHO/M
CNFE1004APOEM/M
CNFE1004BPOEM/M
CNFE1004APOEMHO/M
CNFE1004BPOEMHO/M
CNFE1004APOES/M
CNFE1004BPOES/M
CNFE1004APOESHO/M
CNFE1004BPOESHO/M
CNFE1002APOEM/M
CNFE1002BPOEM/M
CNFE1002APOEMHO/M
CNFE1002BPOEMHO/M
CNFE1002APOES/M
CNFE1002BPOES/M
CNFE1002APOESHO/M
CNFE1002BPOESHO/M
CNFESFPMCPOE30/M
CNFESFPMCPOE60/M
The ComNet™ CNFE100(X)POE(M,S)/M Series 10/100Mbps Ethernet media converters
provide full-duplex fiber optic transmission of a single channel of 10/100BASE-T(X) data
through multimode or single mode optical fiber. Type ST, SC or SFP optics are available.
They provide full compliance with IEEE 802.3at as Power Sourcing Equipment (PSE),
with a maximum power of 30 watts in Mode A or Mode B, making them ideal for those
applications where the remote equipment draws significant power. A higher output 60
watt model is available.
Mode A and mode B are selected by the media converter automatically. The Ethernet
electrical interface auto-negotiates to either 10 or 100Mbps without the need for any
user selection, and the 100BASE-FX optical interface operates at 100Mbps.
LED indicators are provided for rapidly ascertaining the operating status of the
device. See Figure 13 on Page 8 for an explanation of the LED Indicators.
Packaged in a rugged, compact sized housing, these units are designed for shelf or
stand-alone mounting, or may be DIN-rail mounted by the addition of ComNet model
DINBKT2 Adaptor plate kit. See Figure A on Page 9 for mounting instructions.
See Figures 1 – 15 for complete installation instructions.
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 1
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 1 – CNFE1003POE(M,S)-M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 2 – CNFE1003POE(M,S)-M MEDIA CONVERTER
REAR PANELFRONT PANEL
MULTIMODE OR
SINGLE MODE
OPTICAL FIBER
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 2TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 3 – CNFE1003POE(M,S)HO-M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 4 – CNFE1003POE(M,S)HO-M MEDIA CONVERTER
REAR PANELFRONT PANEL
MULTIMODE OR
SINGLE MODE
OPTICAL FIBER
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 3TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 5 – CNFE1005POE(M,S)-M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 6 – CNFE1005POE(M,S)-M MEDIA CONVERTER
REAR PANELFRONT PANEL
MULTIMODE OR
SINGLE MODE
OPTICAL FIBER
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 4TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 7 – CNFE1005POE(M,S)HO-M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 8 – CNFE1005POE(M,S)HO-M MEDIA CONVERTER
REAR PANELFRONT PANEL
MULTIMODE OR
SINGLE MODE
OPTICAL FIBER
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 5TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 9 – CNFESFPMCPOE30M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 10 – CNFESFPMCPOE30M MEDIA CONVERTER
REAR PANELFRONT PANEL
OPTICAL FIBER
DEPENDENT ON
SELECTION OF SFP
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 6TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 11 – CNFESFPMCPOE60M MEDIA CONVERTER
CAT5e/6
BLACK
BLACK
W/WHITE STRIPE
Surface Mount
Power Supply: 48VDC @ 1.25A
FIGURE 12 – CNFESFPMCPOE60M MEDIA CONVERTER
REAR PANELFRONT PANEL
OPTICAL FIBER
DEPENDENT ON
SELECTION OF SFP
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 7TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CNFE100(X) POE SERIES
FIGURE 13 – LED INDICATORS
FX LINK/ACT POE POWER
GREEN
Fiber interface linked
(when lit or flashing)
OFF
Fiber interface not
linked.
FIGURE 14 – POSSIBLE ETHERNET CONFIGURATION
Ethernet IEEE 802.3 Network Element determined by user.
30W PoE
Power is being
Unit powered up
supplied by unit
Power not supplied
Unit powered down
by unit.
(No PoE device)
CNFE1003POEM-M CNFE1003POEM-M
CAT5e/6 with
RJ-45 Connections
Remote Ethernet
IEEE802.3at PD
FIGURE 15 – POE PIN ASSIGNMENT
RJ-45 port supports IEEE802.3at
End-point: Positive (VCC+): RJ45 pin 1, 2 or 4, 5
Negative (VCC-): RJ45 pin 3, 6 or 7,8
Data: (1, 2, 3, 6)
CAT5e/6 with
RJ-45 Connections
Ethernet IEEE 802.3
Network Element
2 Multimode
Optical Fibers
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 8TECH SUPPORT: 1.888.678.9427
MECHANICAL INSTALLATION INSTRUCTIONS
INSTALLATION CONSIDERATIONS
This unit is supplied as a Standalone module. Units should be installed in
dry locations protected from extremes of temperature and humidity.
WARNING: Unit is to be used with a Listed Class 2 power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - Consideration should be given to installing
the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment should be such that
the amount of air flow required for safe operation of the equipment is not
compromised.
FIGURE A
Dimensions are for a small size ComNet™ surface mount module
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
INS_CNFE100(X) POE SERIES_REVA
04/25/13
PAGE 9© 2013 Communications Net works Corporation. All Rights Reserved. “ComNet” and the “C omNet Logo” are regist ered trademar ks of Communication Net works, LLC .
Loading...