Comnet CLRVE1COAX, CLRVE2COAX, CLTVE1COAX-M, CLTVE1COAXPoE-M User Manual

INSTALLATION AND OPERATION MANUAL

CL(T,R)VE(1,2)COAX[POE][/M]

ANALOG AND IP VIDEO OVER COAX

This manual serves the following
ComNet Model Numbers:

CLT VE1C OA X /M

CLRVE1COAX/M

CLTVE1COAXPOE/M

CLRVE1COAX

CLRVE2COAX

The ComNet™ CL(T,R)VE(1,2)COAX[POE][/M] is a communications link that combines
composite analog baseband video and 10/100T(X) Ethernet on a single RG59 coaxial
cable and transmits it up to 500 meters. The device is particularly suited to applications
where the addition of IP Video to an existing analog video system is required. The
CLTVE1COAXPOE/M model can provide power to the IP device via PoE.

LED indicators are provided for rapidly ascertaining the operating status of the
device. See Figure 6 on Page 5 for an explanation of the LED Indicators.

Packaged in a rugged, compact sized housing, these units are designed for surface or
stand-alone mounting, or may be DIN-rail mounted by the addition of ComNet model
DINBKT2 Adaptor plate kit. Refer to Installation Considerations on Page 5 and
Figure A on Page 6 for mounting instructions.

See Figures 1 – 6 for complete installation instructions.

INS_CL(T,R)VE(1,2)COAX[POE][M]_REV- 04/25/13 PAGE 1

INSTALLATION AND OPERATION MANUAL CL(T,R)VE(1,2)COAX[POE][/M]

FIGURE 1 – CLTVE1COAX/M TRANSMITTER

COAX

LINK TO RX

MODULE

Black (+)

Black w/ White

Stripe (–)

Operating Power: 12 to 36 VDC or 24 VAC
Power Consumption: 2W

FIGURE 2 – CLRVE1COAX/M RECEIVER

ANALOG
VIDEO IN

ETHERNET

COAX
LINK TO TX
MODULE

Black (+)

Black w/ White

Stripe (–)

Operating Power: 12 to 36 VDC or 24 VAC
Power Consumption: 2W

ANALOG
VIDEO OUT

ETHERNET

INS_CL(T,R)VE(1,2)COAX[POE][M]_REV- 04/25/13 PAGE 2TECH SUPPORT: 1.888.678.9427