Page 1
Part No.
Description
M10LW-
Outlet wall faceplate, 1-port
M10L-
Modular outlet faceplate, 1-port
M13C-
Modular furniture faceplate, 3-port
M14CE-
Modular furniture faceplate, 4-port
M14CE-E-
Modular furniture faceplate, 0.08 snap, 4-port
M14CE-E-
Modular furniture faceplate, 0.125 snap, 4-port
M14CH-
Designer furniture faceplate, 4-port
M12L-
Outlet faceplate, 2-port
M14L-
Outlet faceplate, 4-port
M16L-
Outlet faceplate, 6-port
M28L-
Double gang outlet faceplate, 8-port
M12AP-
Vertical outlet faceplate, 2-port
M13L-
Vertical outlet faceplate, 3-port
M4CA-
Variable furniture faceplate
M10LE-
Designer faceplate, 1-port
M12LE-
Designer faceplate, 2-port
M13LE-
Designer faceplate, 3-port
M14LE-
Designer faceplate, 4-port
M16LE-
Designer faceplate, 6-port
M106FR2-
Modular mounting frame (106 style), 2-port
M106FR4-
Modular mounting frame (106 style), 4-port
M108FR1-
Modular mounting frame (decora style), 1-port
M108FR3-
Modular mounting frame (decora style), 3-port
M26FP-
Flexible double gang frame
M13FP-
Flexible single gang frame
M13FP-TR1-
Tamper-resistant, single gang base, low profile cover
M13FP-TR-
Tamper-resistant faceplate, single gang base, high profile cover
M13FP-TRC1
Tamper-resistant low profile cover, single gang
M13FP-TRC
Tamper-resistant high profile cover, single gang
262 – White, 003 – Black, 270 – Gray, 246 – Ivory, 148 – Almond
860345875
Issue 7, March 2015
www.commscope.com
Faceplates – Product Information and Installation
General
CommScope® offer s a wide array of faceplates that s upport man y types of appl ications. This i nstruction sh eet
supports some of the faceplates that are offered, and all of the products referenced in this document are
designed to be used with the M-series Category 6, 5e, and 3 outlets. The faceplates are available in ivory,
white, black, gra y, and almond colors a nd in a 1-, 2-, 3-, 4-, and 6-port conf iguration. Ther e are also faceplates
available in stainless steel, brass, bronze, and dark bronze.
Ordering information is listed below:
Note: Except for metal faceplates, most faceplates are available in the following 4 or 5 colors
designated by the listed 3-digit numbers at the end of the ordering number.
© 2015 CommScope, Inc.
All rights reserved
This product is covered by one or more U.S.
patents or their foreign equivalents. For paten t s, see
www.commscope.com/ProductPatent/ProductPatent.aspx
Page 1 of 3
Page 2
860345875
Instruction Sheet
Part No.
Description
M10LW
Stainless steel phone plate, 1-port
M10LW4
Stainless steel 4-inch (102mm) phone plate, 1-port
M11SP
Stainless steel faceplate, 1-port
M12SP
Stainless steel faceplate, 2-port
M13SP
Stainless steel faceplate, 3-port
M14SP
Stainless steel faceplate, 4-port
M16SP
Stainless steel faceplate, 6-port
M11SP-L
Stainless steel faceplate with label, 1-port
M12SP-L
Stainless steel faceplate with label, 2-port
M13SP-L
Stainless steel faceplate with label, 3-port
M14SP-L
Stainless steel faceplate with label, 4-port
M16SP-L
Stainless steel faceplate with label, 6-port
M24SP-L
Stainless steel double gang faceplate with label, 4-port
M28SP-L
Stainless steel double gang faceplate with label, 8-port
M13CLS-
Multimedia faceplate, 3-port
M12B
Brass faceplate, 2-port, single gang
M13B
Brass faceplate, 3-port, single gang
M14B
Brass faceplate, 4-port, single gang
M13BB
Bronze faceplate, 3-port, single gang
M26BDSB
Brushed dark statuary bronze faceplate, 6-port, double gang
262 – White, 003 – Black, 270 – Gray, 246 – Ivory, 148 – Almond
www.commscope.com
Note: Except for metal faceplates, most faceplates are available in the following 4 or 5 colors
designated by the listed 3-digit numbers at the end of the ordering number.
How to Contact Us
• To find out more about CommScope® products, visit us on the web at www.commscope.com/
• For technical assistance:
- Within the United States, contact your local account representative or technical support at
1-800-344-0223. Outside the United States, contact your local account representative or
PartnerPRO
™
Network Partner.
- Within the United States, report any missing/damaged parts or any other issues to CommScope
Customer Claims at 1-866-539-2795 or email to claims@commscope.com. Outside the United
States, contact your local account representative or PartnerPRO Network Partner.
Parts List
Each faceplate package will contain one faceplate and two or four screws depending on whether the faceplate is
a single or double gang unit. Faceplates equipped with label holders will be supplied with the appropriate
number of clear label covers and paper labels. The designer faceplates will also have opaque covers that can
be used in place of the clear label covers if desired. The stainless steel phone plate is supplied with two screws
that have mushroomed shaped heads that are used for supporting wall-mount phones or other wall-mount
devices.
Page 2 of 3
Page 3
www.commscope.com
860345875
Instruction Sheet
Electrical box
M10LW
Mounting
stud screws
Step 1 – Terminate and Install Information Outlets
1. Route cables into the electrical wall box.
2. Prepare cables per local practices and terminate outlets per the instructions included with the M-series
information outlets.
Note: Always use c are to m inimize movem ent and stress on the ex posed twiste d-pair conduc tors near th e
outlets.
3. Once terminated, sna p the outlets into the b ack of the faceplate. The ou tlets should be mounted such that
the mating plugs (once connected) will have their release tabs located toward the bottom of the faceplate.
Step 2 – Install Faceplate
1. Store slack cable in the wall box and position the faceplate over the box opening.
2. Line up mounting h oles on the facep late with holes in t he electr ical box and us ing the t wo screws pr ovided,
secure the faceplate to the box.
Note: Phones and other devices designed to mount on the M10LW stainless steel phone plate studs should
be mounted using the instructions that come with the phone or other device.
Step 3 – Labeling
1. If the faceplate is equippe d with label holders, mark the paper labels with th e necessary information and
place in the recessed area on the faceplate.
2. Cover the paper labe l with a clear pl astic cover. Opaque covers c an be used in the recessed areas on the
designer faceplates if desired.
Page 3 of 3
Loading...