
Effective picture elements (H x V)
AHD/TVI: 2592x1944 (5MP)@12.5fps / 2560x1440 (4MP)@30fps
CVI: 2560x1440 (4MP)@30fps
0 (Black & White, LED's IR ON)
IR illumination range (m)
Multilingual OSD, BLC, D-WDR, AGC, Mirror function
Current consumption (mA - max)
Dimensions (WxHxD / øxH - mm)
AHCAM 100 SERIES
4-5MP AHD/TVI/CVI
Day & Night cameras
Setup:
- Press in the middle the joystick to access the main menu (SET button).
- Move the joystick up or down to navigate vertically through the menu and options.
- Move the joystick left or right to navigate horizontally through the menu and option
Instructions for selecting the BNC connector output signal type
- Press in the middle the joystick to access the main menu (SET button).
- Move the joystick up or down to navigate vertically through the menu and select
ADJUST OUTPUT MODE FORMAT
- Move the joystick left or right to select the desired video format
Using Zoom and Focus (art. AHCAM165ZA, AHCAM175ZA and
AHCAM1858ZA only)
Use the UP (zoom+) and DOWN (zoom-) keys to control the lens zoom
Use the LEFT and RIGHT keys for manual focus
Technical specifications:
Specifications are subject to change without notice
Connections:

Elementi effettivi (H x V)
AHD/TVI: 2592x1944 (5MP)@12.5fps / 2560x1440 (4MP)@30fps
CVI: 2560x1440 (4MP)@30fps
0 (bianco e nero, LED's IR ON)
Distanza di illuminazione (m)
Bilanciamento dei bianchi
OSD multilingua, BLC, D-WDR, AGC, funzione Specchio
Grado di protezione IP/IK
Corrente assorbita (mA - max)
Temperatura di funzionamento
Dimensioni (LxHxP / øxH - mm)
AHCAM SERIE 100
Telecamere Day & Night 4-5MP
AHD/TVI/CVI
Impostazioni:
- Premere centralmente il joystick per accedere al menu principale (pulsante SET).
- Muovere il joystick verso l'alto o verso il basso per spostarsi verticalmente nei
menu e nelle opzioni.
- Muovere il joystick verso destra o verso sinistra per spostarsi orizzontalmente nei
menu e nelle opzioni
Istruzioni per la selezione del tipo di segnale in uscita sul connettore BNC
- Premere centralmente il joystick per accedere al menu principale (pulsante SET).
- Muovere il joystick verso l'alto o verso il basso per spostarsi verticalmente nei
menu e selezionare ADEGUARE OUTPUT MODE FORMAT
- Muovere il joystick verso destra o verso sinistra per selezionare il formato video
desiderato
Utilizzo dello zoom (solo art. AHCAM165ZA, AHCAM175ZA e AHCAM1858ZA)
Utilizzare i pulsanti ALTO (zoom+) e BASSO (zoom-) per controllare lo zoom
Utilizzare i pulsanti SINISTRA e DESTRA per controllare manualmente il fuoco
Specifiche tecniche:
Le specifiche tecniche sono soggette a variazioni senza preavviso
Connessioni: