Comelit 3360 User Manual

EN

TECHNICAL

MANUAL

1

2

3

DEF

ABC

4

JKL

7

TUV

A

D

GHI

5

6

MNO

PQRS

8

9

WXYZ

.;:

0

B

C

E

F

Technical manual for digital call module Art. 3360

www.comelitgroup.com

Table of contents

EN

General description Self-testing Setting the language Use

1. Calling a user

2. Finding a name in the directory

Accessing the programming mode Name directory

1. Entering names in the directory

2. Changing a name or a code in the directory

3. Deleting a name in the directory

4. Clearing the directory

Access Control

1. Changing the default supercode (778899)

2. Restoring the default supercode (778899)

3. Entering password codes

4. Deleting a password code

5. Finding a password code

6. Erasing all passwords

Settings of the directory module (Art. 3360)

1. Modifying the language setting

2. Setting the type of remote connection

3. Setting the second language

4. Disabling the second language

5. Setting call management

6. Enabling/disabling name-only display

7. Enabling/disabling the welcome message

8. Entering the welcome message

9. Enabling/disabling the welcome message

10. Enabling/disabling the screensaver

11. Changing the keypad sensitivity

12. Enabling/disabling the keypad tone

13. Restoring the default values of the directory module

14. Changing the RS485 address of the porter module

15. Viewing the number of names entered in the directory, the software version, the number of passwords entered and the ID code (RS485 address)

Standard settings of the porter module (Art. 1622, Art. 4680, Art. 4680C)

1. Setting the porter module parameters (audio time, door lock time, reset time)

2. Viewing the porter module parameters (audio time, door lock time, reset time)

Advanced settings of the porter module (Art. 1622, Art. 4680, Art. 4680C)

1. Lock on SE

1A. Setting the type of door lock on the SE output of the porter module 1B. Enabling/disabling the door lock conﬁ rmation tone on the porter module 1C. Enabling/disabling the standby lock release on the porter module 1D. Viewing the parameters of the door lock on the SE output of the porter module

2. Relay contact

2A. Enabling/disabling the actuator function on the relay contact 2B. Enabling/disabling the relay contact in parallel to the porter module SE output 2C. Viewing the relay contact parameters

3. S serial

3A. Enabling/disabling the actuator function on the S serial line

4. Voice messages

4A. Enabling/disabling voice and visual messages on the porter module

5. Call

5A. Enabling/disabling triple call 5B. Enabling/disabling the call conﬁ rmation tone 5C. Enabling/disabling the call codes booster 5D. Setting the call answer wait time 5E. Viewing the porter module call parameters

6. Self-ignition

6A. Enabling/disabling self-ignition

7. Default settings

7A. Restoring the default values of the porter module

Software Art. 1249B

1. Installing the USB driver for connecting Art. 3360 to a PC

2. Using the directory via software Art. 1249B

3. Multidownload

Menu diagram Table of Simplebus Top products Diagram

2

3 4 4

4 5 5

5 6 7 8

8 9 9

9 10 10

11 11 12 12 13 15 15 16 16 17 17 17 18 18 19

19 20

20 21 21 22

22 23 23

24

25 25 26 26 27

27

28 28 29 30 34 35

General description

The Comelit digital call module Art. 3360 can be used in Simplebus and Simplebus Top systems, and is ﬁ tted with a name directory to store a list of names and passwords as well as an alphanumerical keypad to call users by entering the code which identiﬁ es them. The main characteristics are as follows:

• Display resolution: 128X64 dots/pitch

• Directory memory: 3500 names of 20 alphanumerical characters and 6000 password codes

• 16 languages available for displaying messages on the name directory and, when the second language is set, the

user interface will switch alternately between the main language and the second language (see "3. Setting the second language" page 12)

• 4 Simplebus or Simplebus Top call management modes (see "5. Setting call management" page 13): Standard Indirect code Immotec standard Immotec indirect

• Display of name only without code (see "6. Enabling/disabling name-only display" page 15)

• Screensaver (see "10. Enabling/disabling the screensaver" page 17)

Option of customising:

• Keypad sensitivity (see "11. Changing the keypad sensitivity" page 17)

• Keypad tone (see "12. Enabling/disabling the keypad tone" page 17)

• Initial welcome message on 4 lines of 10 characters each (see "8. Entering the welcome message" page 16)

With software Art. 1249B it is possible to:

• Enter (download) and read (upload) names and passwords by connecting to a computer via USB or on RS485 serial line using interface card Art. 1319 (see diagram on page 35)

• Initial welcome message on 4 lines of 10 characters each (see "8. Entering the welcome message" page 16)

• Customise the standby messages displayed on the name directory

Alphanumeric keypad Special characters

0 space 0 1 ABCÅÄĄÆßČĆ1 2 DEFÉĘĚ2 3 GHI3 4 JKLŁ4 5 MNOŃÖØÓ5 6 PQRS6 7 TUVÜ7 8 WXYZ8 9 ,;:._-#*"9 A A B B C C D D E E F F

EN

3

Self-testing

EN

On power-up the device carries out a diagnostic test of the connections to check the correct communication and conﬁ guration of the porter module Art. 1622, Art. 4680, Art. 4680C. The message PLEASE WAIT indicates self-testing in

progress. On completion of self-testing, press the to put the module in standby.

The word OK should appear next to the menu items with the name SIMPLEBUS or SIMPLEBUS TOP at the bottom of the screen depending on the conﬁ guration of the porter module and the directory module. If the following message appears:

- FAILED check correct serial connection between directory module and porter module Art. 1622, Art. 4680, Art. 4680C.

- ERROR check that the directory module and porter module Art. 1622, Art. 4680, Art. 4680C are both conﬁ gured to the same system (SIMPLEBUS or SIMPLEBUS TOP) (see "5. Setting call management" page 13).

INITIALIZING OK NAMES STORED OK PASSWORD OK SPEAK. SERIAL OK

SELECT LANGUAGE ITALIANO

*ENGLISH

FRANCAIS

OK OK

key

SCROLL ESC

» * indicates language selected

3. to exit, press

Use

1. Calling a user

} standby mode

1A. enter the user code (e.g. 2)

CALL CANC

CALL USER

_ _ 2

SIMPLEBUS

Setting the language

1. to display the language that you want to select, scroll

through the list using

DEFAULT= Italiano

SELECT LANGUAGE

*ITALIANO

ENGLISH FRANCAIS

OK OK

SCROLL ESC

2. press or to conﬁ rm

4

1B. or scroll through the directory using

MARIO ROSSI

CODE: 002

SCROLL CALL

2. to call, press

3. to exit, press

2. Finding a name in the directory

} standby mode

1. press

ENTER PART

OF THE NAME

REQUIRED

2. enter the name using the alphanumeric keypad, for the

use of special characters see table on page 3

M_

ESC CANC

3. to conﬁ rm the ﬁ rst letter of the name, press

4. to display the name, scroll through the directory using

MARIO ROSSI

OK

ENTER PASSWORD:

9

*****

OK CANC

2. press

NAME DIRECTORY ACCESS CONTROL SETTINGS INFO

to conﬁ rm

OK OK

SCROLL ESC

Name directory

1. Entering names in the directory

1A. Automatic entry

It is possible to download a name list using software Art. 1249B, see page 28. CAUTION: not available if the call mode is IMMOTEC STANDARD or IMMOTEC INDIRECT, see page 13.

1B. Manual entry

1. access programming mode, see page 5

2. select the menu items: Name directory ⇒ Enter names

EN

CODE: 002

SCROLL CALL

} to exit, press

Accessing the programming mode

1A. connect terminal PRG to GND and power up the

module

1B. or press

and enter the default supercode 778899

ENTER NAMES DELETE NAMES CHANGE NAMES CLEAR ALL NAMES

OK OK

SCROLL ESC

3. press

4. enter the name using the alphanumeric keypad, for the

use of special characters see table on page 3

or to conﬁ rm

5

EN

MARIO ROSS_

3. press

or to conﬁ rm

ESC CANC

5. to conﬁ rm, press

6. enter the code (max. 3 digits) using the alphanumerical

keypad

ESC CANC

7. press

8. to exit, press

CODE:

_ _ 2

to conﬁ rm

OK

2. Changing a name or a code in the directory

ENTER PART

OF THE NAME

REQUIRED

4. enter the name using the alphanumeric keypad, for the

use of special characters see table on page 3

M_

SCROLL CANC

5. to conﬁ rm the ﬁ rst letter of the name, press

6. to display the name that you want to change, scroll

through the directory using

MARIO ROSSI

OK OK

SCROLL ESC

OK

CAUTION: not available if the call mode is IMMOTEC

STANDARD or IMMOTEC INDIRECT, see page 13

1. access programming mode, see page 5

2. select the menu items: Name directory ⇒ Change names

ENTER NAMES DELETE NAMES CHANGE NAMES CLEAR ALL NAMES

OK OK

SCROLL CANC

6

7. to conﬁ rm the selected name that you want to change,

press or

MARIO ROSSI_

OK OK

SCROLL CANC

8. change the name using the alphanumeric keypad, for

the use of special characters see table on page 3

9. press or to conﬁ rm

10. change the code (max. 3 digits) using the alphanumerical

keypad

CODE:

_ _ 2

3. press

or to conﬁ rm

ENTER PART

OF THE NAME

REQUIRED

EN

ESC CANC

11. press to conﬁ rm

12. to exit, press

OK

3. Deleting a name in the directory

CAUTION: not available if the call mode is IMMOTEC

STANDARD or IMMOTEC INDIRECT, see page 13

1. access programming mode, see page 5

2. select the menu items:

Name directory ⇒ Delete names

ENTER NAMES DELETE NAMES CHANGE NAMES CLEAR ALL NAMES

4. enter the name using the alphanumeric keypad, for the

use of special characters see table on page 3

M_

SCROLL CANC

5. to conﬁ rm the ﬁ rst letter of the name, press

6. to display the name that you want to change, scroll

through the directory using

MARIO ROSSI

OK OK

SCROLL ESC

7.

to conﬁ rm the selected name that you want to delete,

or

press

OK

OK OK

SCROLL ESC

8. to exit, press

7

4. Clearing the directory

EN

1. access programming mode, see page 5

2. select the menu items: Name directory ⇒ Clear all names

ENTER NAMES DELETE NAMES CHANGE NAMES CLEAR ALL NAMES

OK OK

SCROLL ESC

3. press or to conﬁ rm

DELETE

ALL NAMES?

Access control

1. Changing the default supercode (778899)

The supercode (778899 is the default code) is used to access the programming menus.

1. access programming mode, see page 5

2. select the menu items: Access control ⇒ Supercode ⇒ Enter new code

ENTER NEW CODE DEFAULT SETTINGS

OK OK

SCROLL ESC

OK CANC

4. press

5. to exit, press

to conﬁ rm

DELETION

IN PROGRESS...

DELETION COMPLETE

3. press

4. change the supercode (max. 6 characters consisting of

numbers and/or letters from A to F) using the alphanumeric keypad

5. press

6. to exit, press

or to conﬁ rm

NEW SUPERCODE:

_A234B

OK

ESC CANC

to conﬁ rm

SUPERCODE CHANGED

8

2. Restoring the default supercode (778899)

1. access programming mode, see page 5

2. select the menu items:

Access control ⇒ Supercode ⇒ Default settings

ENTER NEW CODE DEFAULT SETTINGS

OK OK

SCROLL ESC

3. press or to conﬁ rm

SUPERCODE CHANGED

3. press

4. enter the password (max. 6 characters consisting of

numbers and/or letters from A to F) using the alphanumeric keypad

5. press

or to conﬁ rm

ENTER PASSWORD:

_ 3ABC4

OK

ESC CANC

to conﬁ rm

EN

4. to exit, press

3. Entering password codes

1A. Automatic entry

It is possible to download a password list using software Art. 1249B, see page 28.

1B. Manual entry

1. access programming mode, see page 5

2. select the menu items:

Access control ⇒ Password ⇒ Enter

ENTER DELETE SEARCH CLEAR

OK OK

SCROLL ESC

6. to exit, press

4. Deleting a password code

1. access programming mode, see page 5

2. select the menu items: Access control ⇒ Password ⇒ Delete

ENTER DELETE SEARCH CLEAR

OK OK

SCROLL ESC

3. press or to conﬁ rm

4. enter the password that you want to delete using the

alphanumeric keypad

9

EN

DELETE PASSWORD:

_ 3ABC4

5. press

6. scroll through the passwords using

to conﬁ rm

ESC CANC

5. press to conﬁ rm

PASSWORD DELETED

6. to exit, press

OK

5. Finding a password code

1. access programming mode, see page 5

2. select the menu items: Access control ⇒ Password ⇒ Search

ENTER DELETE SEARCH CLEAR

OK OK

SCROLL ESC

3. press or to conﬁ rm

4. enter the ﬁ rst letter or number of the password to search

3ABC4

SCROLL ESC

6. Erasing all passwords

1. access programming mode, see page 5

2. select the menu items: Access control ⇒ Password ⇒ Clear

ENTER DELETE SEARCH CLEAR

OK OK

SCROLL ESC

3. press or to conﬁ rm

SEARCH PASSWORD:

DELETE

ALL PASSWORDS?

_ _ _ _ _ _

OK CANC OK CANC

4. press to conﬁ rm

SEARCH PASSWORD:

_ _ _ _ _ _

_ _ _ _ _ 3

OK CANC

10

DELETION

IN PROGRESS...

DELETION COMPLETE

SELECT LANGUAGE ITALIANO

*ENGLISH

FRANCAIS

OK OK

SCROLL ESC

EN

5. to exit, press

Settings of the directory module (Art. 3360)

1. Modifying the language setting

1. access programming mode, see page 5

2. select the menu items:

Settings ⇒ Select language

TYPE OF DOWNLOAD SYSTEM PARAMETERS SELECT LANGUAGE SECOND LANGUAGE

OK OK

SCROLL ESC

3. press or to conﬁ rm

» DEFAULT= Italiano

4. to display the language that you want to select, scroll

through the list using

SELECT LANGUAGE

*ITALIANO

ENGLISH FRANCAIS

OK OK

SCROLL ESC

» * indicates language selected

6. to exit, press

2. Setting the type of remote connection

CAUTION: For downloading in RS485 mode, see diagram

on page 35

1. access programming mode, see page 5

2. select the menu items: Settings ⇒ Type of download

TYPE OF DOWNLOAD SYSTEM PARAMETERS SELECT LANGUAGE SECOND LANGUAGE

OK OK

SCROLL ESC

3. press or to conﬁ rm

4. to display the type of download that you want to select,

scroll through the list using

TYPE OF DOWNLOAD

*OFF

USB RS485

OK OK

SCROLL ESC

5. press or to conﬁ rm

5. press

or to conﬁ rm

11