Comdial Impact 8024S LCD Speakerphone, Impact 8024S Administrator's Manual

Comdial Digitech DSU Impact Telephones

Administrator’s Guide

Creating LCD Response Messages

Your system provides two messages that can be used to alert other system users of your station
status, “Back at…” and “Call at…”. You may add up to 8 customized messages. To store the LCD
messages:

1. Write your message on a piece of paper (each message can have up to 16 characters).

2. Use the letter table code to assign a number for each letter.

3. Write the numbers on a piece of paper.

4. Press INTERCOM

5. Dial “*#05”.

6. Dial a message location number (1-9 and 0).

7. Dial “#” to clear the current message in that location.

8. Enter the 2-digit codes you wrote down in step 3.

9. Dial “*” to save the message.

10. Repeat as needed.

11. Press SPEAKER to end.

When the messages are programmed, make a list of the stored messages and their location
numbers for each user on your system.

Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800 362-6740 for all your

telecom needs.

Page 1 of 6

Character Code Character Code Character Code

A 21 a 24 SPACE 12
B 22 b 25 ; 17
C 23 c 26 / 18
D 31 d 34 “ 19
E 32 e 35 . 27
F 33 f 36 , 28
G 41 g 44 : 29
H 42 h 45 1 01
I 43 i 46 2 02
J 51 j 54 3 03
K 52 k 55 4 04
L 53 l 56 5 05
M 61 m 64 6 06
N 62 n 65 7 07
O 63 o 66 8 08
P 71 p 74 9 09
Q 11 q 14 0 00
R 72 r 75 ^ ^
S 73 s 76
T 81 t 84
U 82 u 85
V 83 v 86
W 91 w 94
X 92 x 95
Y 93 y 96
Z 13 z 14
Example: The message, “Gone Home.” would be 41 66 65 35 12 42 66 64 35 27

Direct Inward Station Dialing

DISD allows for an external caller to reach an extension directly, with no assistance from the
attendant. When the caller reaches your system, a continuous DISD tone is played and the caller
can then enter the extension number. If the call is answered by another station, the caller can
request transfer. If the called station is in use, the call is camped-on at the busy station. If the
station is part of a hunt group and is busy, the call will route to another station in the group if
available.

Naming Stations

LCD speakerphones display the station name of the internal caller who has reached you. The name
can contain up to 7 letters. To name stations:

1. Press INTERCOM

2. Dial “*#06”

3. Dial the station number of the telephone to be named

4. Dial “#” to clear

5. Dial the 2-digit codes (above) for the letters desired

6. Dial “*” to enter more names.

7. Press SPEAKER to end.

Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800 362-6740 for all your

telecom needs.

Page 2 of 6