Comark 206 User Manual

Foodservice and
Food Processing
Your Total Temperature
Solution.
Designed for today’s busy restaurant kitchens, food processing facilities
Quick - Reliable
- Accurate
and storage areas, Comark’s line of thermometers and related temperature and humidity instruments lead the industry. Whether it’s a waterproof
C28 Temperature Kit
Time and Temperature in One Unit
±1°F Accuracy, Waterproof, Long Battery Life, Wide Variety of Probes
C28 thermocouple, PDT300 pocket digital thermometer, or a FoodPro Plus infrared with probe, Comark has a solution to fit your budget
Prevent the outbreak and spread of foodborne illness. Our range of monitoring and recording
instruments – N5001USB HACCP Auditor, Diligence and EVt loggers, and the new RF500A wireless system – offer accurate and tamper­proof 24/7 recording of key parameters to augment your HACCP and food safety program.
Designed especially for the food industry Comark instruments meet a number of key international standards:
All of our key products are NSF certified so
you can trust that they meet their published accuracy and specifications. Every component is food grade and manufactured in a sanitary facility.
IP ratings tell the user immediately how
effectively the electrical instrument case protects against the ingress of dust and water.
The CE mark certifies that the product meets
European health and safety regulations. Many Comark products are molded with
BioCote®, a patented silver-based antimicrobial
agent. BioCote® effectively inhibits the function, growth, and reproduction of a wide range of micro-organisms. Its protection is increasingly accepted as part of HACCP, due diligence and health and safety procedures. BioCote® protection lasts for the life of the instrument because the agent is present throughout the case plastic and cannot rub off or leach out. The active ingredients are registered with the EPA.
With our wide range of products, a knowledgable staff and a commitment to your satisfaction, you can count on Comark temperature measurement needs.
for answers to all your
.
UTL80
Refrigerated Drawer Stick-on Thermometer
Double stick tape for securing to a refrigerated drawer
FPP FoodPro Plus
Infared Thermometer with Flip down Penetration Probe
300B
Ruggedized and Water Resistant
New thin tip and field calibratable with an accuracy of ±2°F (1°C)
DT400
Waterproof, Field Calibratable, Max Hold, Dishwasher Safe
PDT300
Waterproof, Field Calibratable, and a Thin 1.5mm Tip
The most popular thermometer for measuring thin foods. Accuracy: ±2°F (±1°C)
PDQ400
Waterproof, Field Calibratable, with a Thin 1.5mm Tip
www.comarkUSA.com
For more information: 1-800-555-6658
K-TYPE PROBES K-TYPE THERMOCOUPLES
KM28 Temperature Kit
K-Type Thermocouple with Sub-miniature Connector
Accuracy: ±2°F (±1°C)
Range: -40° to 1,000°F (-40° to 500°C)
Large LCD and auto switch-off to save battery life
Water resistant and easy to clean
membrane keypads
Includes CRS/5 protective rubber boot
Accepts a wide range of K-Type probes
(see page 5)
KM28/P5 includes:
KM28
PK19M reduced tip penetration probe
CRS/5 protective rubber boot
9V battery
AC315 carrying case
KM28Kit includes:
KM28
PK19M reduced tip penetration probe
CRS/5 protective rubber boot
9V battery
WB2/US
Wall Bracket
for KM28
KM28P5
ATT29
4’ Oven/Air Probe with Clip
ATT50
Penetration Probe, 8” stem
ATT65
Needle Probe, 3.75” stem
PK24M/US
Food/Frozen Penetration Probe (3.3mm)
Temperature range: -58° to +482°F (-50° to +250°C)
SK25
Heavy Duty Surface Probe
Temperature range: -58˚ to 1200˚F (-50˚ to 650˚ C)
SK42M
KM28Kit
PK15M
Micro-Tip Penetration Probe (1.1mm)
Temperature range: -58° to +482°F (-50° to +250°C)
Grill Surface Probe
Temperature range: -58° to +482°F (-50° to +250°C)
C28Kit
C28 Temperature Kit
K-Type Thermocouple with Sub-miniature Connector
Designed for heavy use in today’s busy kitchens.
Waterproof and Rugged
High Accuracy – better than ±1°F
Built-in Clock and Countdown Timer
7,000 hour battery life
Range: -328° to 1112°F (-200° to 600°C)
Data Hold and Auto Switch Off
BioCote® Antimicrobial Protection
Settable alarms
2 Year Warranty
See probes on page 5
Battery: 2 x AA Alkaline
(see Probes on page 5)
C28 Kit includes:
C28 and PK19M penetration probe
C20WB
Probe Caddy and Wall Bracket
PK19M
Penetration Probe with Reduced Tip (1.5mm)
Temperature range: -58° to +482°F (-50° to +250°C)
PW70T
Antibacterial Probe Wipes
Tub of 70
PW200T
Antibacterial Probe Wipes
Tub of 200
PK23M
Oven/Meat Probe
Temperature range: -58° to +482°F (-50° to +250°C)
SK40M
Weighted Griddle Probe
Temperature range: +500°F (+260°C) for up to 5 minutes
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
T-TYPE THERMOCOUPLES AND PROBES
ECONOMY TESTERS
P125F / P250F Pocketherm
Thermistor and Thermocouple
Pocketherm is fast and accurate. Set different probe angles for taking different temperatures. Audible alarm plus flashing LEDs instantly indicate critical HACCP zones. Choose the P125F for greater accuracy or the P250F for higher range. Also available in °C.
Switches on when probe swings out!
NEAT: Probe angles to fit the measurement FAST: Tapered probe for quicker response COM PACT: Fits easily in pockets or cases.
LED indicators for quick recognition of HACCP temperature zones
Yellow: Cold Hold Below 40°F Green: Hot Hold 140°F to 180°F Red: Ground Beef Above +158°F
Specifications: P250F (thermocouple) P125F (thermistor)
Range: -58°F to +482°F -40°F to +257°F Resolution: 0.1° 0.1° Accuracy: ±2°F, up to +257°F ±0.9° from -4°F to +158°F Battery: 9V 9V Auto Off: After 1 hour After 1 hour
N9094
N9094
T-Type thermocouple with extra tough water­proof case for food processing environments!
Waterproof and dust proof to IP68 standard
Range: -328° to 752°F (-200° to 400°C)
Accuracy at 73°F (+23°C): ±0.9°F (±0.5°C)
Clock, countdown timer, data hold
10 year battery life
2 year warranty
T-Type thermocouple standard or thermistor
optional
Optional CRS/6 protective rubber boot
Probes must be purchased separately
N9094 Kit includes:
N9094
CRS/6 protective rubber boot
PT24LC/US penetration probe
MC28 case
C22Kit
ST22L/W
Surface Probe with Heat Resistant Lead
Temperature range:
-148˚ to 482˚ F (-100˚ to 250˚ C)
C22
T-Type Thermocouple with locking probe connector
For complete assurance that the unit and probe “system” accuracy is better than 1°F, the C22 with a Comark locking probe connector is your best answer. The C22 comes in the same waterproof and rugged case as the C28 and also includes the Clock, Countdown Timer, DataHold and Auto Switch Off features.
System Accuracy (Type-T Thermocouple): ±0.9°F (0.5°C)
System Accuracy (PST Thermistor): ±0.6°F (0.3°C)
Range: -328° to 752°F (–200° to 400°C)
TX27L
Thermometer Test Cap
The TX27L simulates a temperature of 32°F (0°C) when attached to a ther­mometer. Compare this point to the reading on the thermometer to ensure calibration.
Calibrated at +32°F in
Check the accuracy of any Comark thermistor thermometer with a
Lumberg type probe connector. C22, N9094, N2012
a UKAS (NIST) laboratory
with a 1 Year Certificate
PT19L
Penetration Probe with Reduced Tip (1.5mm)
Temperature range:
-148° to +482°F (-100° to +250°C)
PT24LC/US
Food/Frozen Penetration Probe (3.3mm)
Temperature range:
-148° to +482°F (-100° to +250°C)
PT23L/INT
Needle Probe, 4” Stem
Temperature range:
-148° to +482°F (-100° to +250°C)
DT15 / DT20
Economical Thermistor Thermometer
These water-resistant, handheld units offer speed and accuracy with interchangeable probes and a large easy­to-read display. Use to test yeast temperatures in baking and brewing, cooked meat temperatures, or the farthest reaches of a walk-in cooler. Includes ATT55 probe, AC22 case, and AA battery.
Specifications DT15 DT20
Accuracy: ±1°F from 32° to 160°F ±2°F (±1°C) ±2°F outside that range Range -40° to 300°F -40° to 300°F Data hold No Yes °C/°F No Yes Min/Max No Yes 1 Year Warranty
Accessories:
ATT55 Liquid probe ATT56 Air probe ATT57 Surface probe ATT58 Extension probe
DT33/P1
Combination Probe Kit
Check everything in the kitchen with one kit. Includes:
DT33
ATT19 oven probe
ATT39 handle
ATT40 surface probe
ATT41 liquid immersion probe
ATT42 air probe
Carrying case
DT33/P3
Food Test / Convenience Kit
This kit includes:
DT33 temperature tester
Soft pouch with belt loop
ATT54A food probe
Hard case
Battery
Instructions.
Specifications DT33
Thermocouple J-Type Accuracy ±0.1%, ±1.3°F Resolution 1.0° Range (°F) -125° to 500° Battery 9V 1 Year Warranty Yes
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
Loading...
+ 9 hidden pages