Code Alarm CA 5050 User Manual

PROFESSIONAL

SERIES

CA 5050

Owner ’s Guide

Remote Start System with

Keyless Entry

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply . Please see your installing dealer for more information.

12009 Audiovox Electronics Corporation. All rights reserved.

Table of Contents

Using Your Remote Control ...............................................................3

Using the Keyless Entry ...................................................................3

Activating Trunk Release (optional) ................................................ 3

Using the Progressive Car Finder Feature......................................3

Using the Personal Protection Alarm ............................................... 3

Valet Mode ........................................................................................ 3

Using Your Remote Vehicle Starter .................................................4

Remote Starting Your Vehicle .......................................................... 4

Entering Your Vehicle while it is Running via Remote Start ...........4

Preheating or Precooling the Vehicle’s Interior............................... 4

Using the “Quick-Stop” Feature ....................................................... 4

Operating the 2 / 3 Hour Start Up Timer Mode ................................5

Operating the Daily Start Timer ........................................................ 5

Remote Start Safety Features ......................................................... 6

Transmitter Button Functions ...........................................................6

Replacing Remote Control Batteries ...............................................6

Warranty Information ...........................................................................7

2 2009 Audiovox Electronics Corporation. All rights reserved.

Using Your Remote Control

Using the Keyless Entry

The button is used to lock the vehicle's doors, the button is used to unlock the
vehicle's doors. To lock or unlock the doors simply press and release the desired
function button one time. For your convenience, the parking lights will flash once
when the doors are unlocked and twice when the door are locked.

NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the or button to activate an audible locking/unlocking
response from the vehicle.

Activating the Trunk Release Feature (Optional)

The button is used to open the trunk of the vehicle. To open the vehicle's trunk
press and hold the button for 3 seconds.

Using the Progressive Car Finder Feature

Press the button to locate your vehicle. The system will sound 5
times at low volume, increasing in volume each time the button is

pressed.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 3 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter’s and buttons can be used to lock and unlock the door (if the

option is installed). To stop the alarm, press and hold the button on the transmitter
again for 3 seconds. The system will automatically stop after 30 seconds.

Valet Mode

Valet Mode is used to disable the system from remote starting. To
enter or exit valet mode simply follow the 4 steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

32009 Audiovox Electronics Corporation. All rights reserved.