Code Alarm CA 4050 User Manual

PROFESSIONAL

SERIES

CA 4050

Owner ’s Guide

Remote Start System

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply . Please see your installing dealer for more information.

Using Your Remote Vehicle Starter

Remote Starting Your Vehicle

The system WILL NOT start the vehicle if any one of the following situations exist:

1. The vehicle's hood is opened.

2. The gear shift selector is not in Park.

3. The brake pedal is depressed.

4. Valet Mode is active.

1. To start the vehicle, press and release the button 2 times within 2 seconds. The vehicle will start and remain running for the pre-programmed 5, 10, 15, 20, 45 or 60 minute run cycle. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center.

2. When you arrive at the vehicle, turn the ignition key to the ON position (Do not try to restart the vehicle), then step on the brake pedal to disengage the remote start. The vehicle will continue to run, but now on it's own power.

Shutting Down the Remote Start

To shut down the remote start feature from the transmitter press and release the

button 2 times within 2 seconds.

Unlocking the Vehicle (optional)

To unlock the vehicle's doors press and hold the button for 3 seconds anytime the vehicle is remote started.

Note: Additional parts and/or labor may be necessary, see your installing dealer for details.

+ 4 hidden pages