Code 3 XT308 User Manual

XT308AS LED WARNING LIGHTS

XT308AS

TABLE OF CONTENTS

Safety Warnings ………………………………………………………………… 1
Specifications……………………………………………………………………… 1
Mounting……………………………………………………………………………. 2
Operation …………………………………………………………………….…... 3
Patterns …………………………………………………………….……… ..…..… 4

Adjustment ..…………………………………......…………………...…………… 6

Troubleshooting ………………………………………………………………… 6

Safety Warnings

IMPORTANT: Please be sure to check that the product is properly fused. Installing the XT308 LED

light without the appropriate fuse will void the warranty.

Specifications

XT308AS

Input Voltage 11-30VDC

Peak Input Current 4 Amp

Output Power 24 W

Flash Patterns 32

Fuse(User supplied) 5A

STORAGE TEMPERATURE RANGE -40+90

Mounting

Mount the XT308 LED light using the brackets supplied and user supplied mounting screws.

CAUTION: Be certain that you have selected a mounting location that does not obstruct the driver’s vision and
allows safe operation of the vehicle. Check the chosen mounting location to ensure that the vehicle’s structure
and material is adequate to support the weight of your light.

Operation

ON/OFF FLASH SWITCH : The 3 position rocker switch used to control the LED flash brightness / off states.
CENTER LEFT/SWITCH: The rocker switch to control LED from right to left.
CENTER RIGHT/SWITCH: The rocker switch to control LED from left to right.
Note: Both CENTER switches in UP position puts unit in CENTER operation.

ON/OFF/PATTERN SELECT MODULER:

DN= Turn the 2 position switch to off / Turn the 3 position switch to DOWN position.
UP= Turn the 2 position switch to on / Turn the 3 position switch to UP position.
X = Turn the 3 position switch to MIDDLE position.

 The 3 position rocker switch in UP mode is in DIM state / in DN mode is in BRIGHT state.
 Touching the yellow wire to the black wire (ground) will change the flash patterns.

Switch Position

ON/OFF

FLASH

CENTER

LEFT

CENTER

RIGHT

Operation NOTE

X DN DN OFF OFF

DN DN DN FLASH (BRIGHT)

P1 P5 P9 P13 P17 P21 P25 P29

UP DN DN FLASH (DIM)

DN UP DN RIGHT SWEEP(BRIGHT)

P2 P6 P10 P14 P18 P22 P26 P30

UP UP DN RIGHT SWEEP(DIM)

DN DN UP LEFT SWEEP(BRIGHT)

P3 P7 P11 P15 P19 P23 P27 P31

UP DN UP LEFT SWEEP(DIM)

DN UP UP CENTER (BRIGHT)

P4 P8 P12 P16 P20 P24 P28 P32

UP UP UP CENTER (DIM)

LAMP 8LAMP 1 LAMP 2 LAMP 3 LAMP 4 LAMP 5 LAMP 6 LAMP 7

LIGHT ARRAY

XT308AS FLASH PATTERN

GROUP #1

ONE LAMP SEQUENCE TO DOUBLE FLASH

P1 : FLASH (Flash UP or DN / Left & Right all turn off)

Alternating pairs of lamps light.

EX : 4+5 - 4+5 - 2+3+6+7 - 2+3+6+7

P2 : RIGHT SWEEP GROUP #2 TWO LAMP SEQUENCE

(Flash UP or DN / Left turn off / Right turn on)

Individual lamps light sequentially from Left to Right with

the last lamp displaying a double flash pattern.

EX: 2→3→4→5→6→7→8→8

P3: LEFT SWEEP P6: RIGHT SWEEP

(Flash UP or DN / Left turn on / Right turn off)

Individual lamps light sequentially from Right to Left with

P4: CENTER

(Flash UP or DN / Left turn on / Right turn on)

Individual lamps light sequentially from Center to bipartite

with the last lamp displaying a double flash pattern.

EX : 4+5 - 3+6 - 2+7 - 1+8 - 1+8

P5 : FLASH

(Flash UP or DN / Left & Right all turn off)

Alternating pairs of lamps light.

EX : 4+5 - 2+3+6+7

(Flash UP or DN / Left turn off/ Right turn on)

Dual lamps light sequentially from Left to Right with the last

the last lamp displaying a double flash pattern.

EX : 7→6→5→4→3→2→1→1

lamp displaying a double flash pattern

EX: 2→2+3→3+4→4+5→5+6→6+7→7+8→8→8